Assembly Procedure - Panasonic Lumix H-ES12035 Service Manual

6.2. Assembly Procedure

Important：
When tightening the screw, use a torque driver (RFKZ0542) with specified torque described in each step.
6.2.1. Assembly of the OIS Unit
1. Install the 4th Lens & AF Rack Unit.
2. Apply grease to the Main Shaft and the Sub Shaft.
3. Install the Main Shaft Holder and Sub Shaft Holder.
4. Tighten the 3 screws (T) by using the torque driver
with specified torque.
Screw (T) ： 5.0mm (Silver)
Torque：(T) 7.8 ± 0.7 N ・cm
5. Stick the AF Motor Flex on the OIS Aperture Flex.
6. Install the AF Motor Assy to the OIS Aperture Flex.
14