Chapter 3. Uefi Events; Uefi Events Organized By Severity - Lenovo ThinkSystem SR250 V3 Reference

Hide thumbs Also See for ThinkSystem SR250 V3:
Table of Contents

Advertisement

Chapter 3. UEFI events

UEFI error messages can be generated when the server starts up (POST) or while the server is running. UEFI
error messages are logged in the Lenovo XClarity Controller event log in the server.
For each event code, the following fields are displayed:
Event identifier
An identifier that uniquely identifies an event.
Event description
The logged message string that appears for an event.
Explanation
Provides additional information to explain why the event occurred.
Severity
An indication of the level of concern for the condition. The severity is abbreviated in the event log to the
first character. The following severities can be displayed:
• Informational. The event was recorded for audit purposes, usually a user action or a change of states
that is normal behavior.
• Warning. The event is not as severe as an error, but if possible, the condition should be corrected
before it becomes an error. It might also be a condition that requires additional monitoring or
maintenance.
• Error. The event is a failure or critical condition that impairs service or an expected function.
User Action
Indicates what actions you should perform to solve the event. Perform the steps listed in this section in
the order shown until the problem is solved. If you cannot solve the problem after performing all steps,
contact Lenovo Support.

UEFI events organized by severity

The following table lists all UEFI events, organized by severity (Information, Error, and Warning).
Table 3. Events organized by severity
Message String
Event ID
FQXSFDD0012I
SATA Hard Drive Error: [arg1] was recovered.
FQXSFMA0001I
DIMM [arg1] Disable has been recovered. [arg2]
The uncorrectable memory error state has been cleared.
FQXSFMA0002I
FQXSFMA0006I
[arg1] DIMM [arg2] has been detected, the DIMM serial number is
[arg3].
FQXSFMA0007I
[arg1] DIMM number [arg2] has been replaced. [arg3]
FQXSFMA0008I
DIMM [arg1] POST memory test failure has been recovered. [arg2]
FQXSFMA0011I
Memory population change detected. [arg1]
FQXSFPU0020I
The UEFI firmware image capsule signature is invalid.
© Copyright Lenovo 2024
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

7dcl7dcm

Table of Contents