Table of Contents
Advertisement
• FQXSPNM4005I: Ethernet interface [arg1] by user [arg2].
This message is for the use case where a user enables or disabled the ethernet interface.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0007
User Action:
Information only; no action is required.
• FQXSPNM4006I: Hostname set to [arg1] by user [arg2].
This message is for the use case where user modifies the Hostname of a Management Controller.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - BMC Network event
SNMP Trap ID: 37
CIM Prefix: IMM CIM ID: 0008
User Action:
Information only; no action is required.
• FQXSPNM4007I: IP address of network interface modified from [arg1] to [arg2] by user [arg3].
This message is for the use case where user modifies the IP address of a Management Controller.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - BMC Network event
SNMP Trap ID: 37
CIM Prefix: IMM CIM ID: 0009
User Action:
Information only; no action is required.
• FQXSPNM4008I: IP subnet mask of network interface modified from [arg1] to [arg2] by user [arg3].
This message is for the use case where a user modifies the IP subnet mask of a Management Controller.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0010
User Action:
Information only; no action is required.
• FQXSPNM4009I: IP address of default gateway modified from [arg1] to [arg2] by user [arg3].
64
ThinkSystem SR250 V3 Messages and Codes Reference
Advertisement
Table of Contents
