Bosch SM Series Instructions For Use Manual page 51

Disturbance
E:27 lights up.
Another error code
de appears in the
display.
E:01 to E:30
Disturbance
Dishes are not dry.
Cause and troubleshooting
Mains voltage is too low.
There is no device error.
Call an electrician.
1.
Have the mains voltage and the electrical installation
2.
checked by an electrician.
There is a technical malfunction.
Press .
1.
Unplug the device or turn off the fuse.
2.
Wait at least 2 minutes.
3.
Insert the power plug of the device into a socket or
4.
switch on the fuse.
Turn on the device.
5.
If the problem occurs again:
6.
Press .
‒
Close the faucet.
‒
Unplug the power plug.
‒
Contact customer service → Page 63 and state
‒
the error code.
Cause and troubleshooting
No rinse aid was used or the dosage was set too low.
Fill with rinse aid → Page 34 a.
1.
Adjust the amount of rinse aid added.
2.
The selected program has no drying phase
Choose a program with drying.
▶
Water collects in recesses in dishes or cutlery.
If possible, arrange dishes at an angle.
▶
Combined cleaner used has poor drying
performance.
Troubleshootingde
51