Switching Off The Softening System; Regenerating The Softening System - Bosch SM Series Instructions For Use Manual

3. Note:Only use special salt for
dishwashers.
Do not use salt tablets. Do not
use table salt.
Pour the special salt into the storage
container.
1
funnel
Fill the storage container completely
with special salt. The water in the
storage container is displaced and
drains away.
Place the lid on the storage
4.
container and screw it on.
11.4 Switch off the softening
system
Notice
To avoid damage to the device, only
switch off the softening system in the
following cases: ¡The water hardness
level is maximum
times 21 °dH and you use a
combined cleaner with salt
substitutes. According to the
manufacturer, you can usually only
use combined cleaners with salt
substitutes up to a water hardness
of 21 °dH without adding special
salt.
¡The water hardness level is 0 -
6 °dH. You can do
without.
Depending on the device
1
a
on special salt
reimbursement
press.
1.
Hold down program button A and
2.
Press until the display
shows H:xx.
Program button A and
3.
sen.
aThe program button A flashes and
the display shows H:04.
Press program button C repeatedly
4.
until the display shows H:00.
To save the setting, press .
5.
aThe softening system is equipped
switches on and the salt refill
indicator is deactivated.
11.5 Regenerating the
softening system
In order to maintain the trouble-free
function of the softening system, the
device regenerates the softening
system at regular intervals.
The softening system is regenerated
in all programs before the end of the
main rinse cycle. The running time and
consumption values increase, e.g. B.
Water and electricity.
Softening systemde
let go-
33