Setting The Softening System; Special Salt - Bosch SM Series Instructions For Use Manual

deSoftening system
A notice:Set your device to the
determined water hardness level.
→

"Setting the softening system",

page 32
If the water hardness level is 0 - 6 °dH,
you can do without special salt and
switch off the softening system.
→
"Switch off the softening system",
page 33
11.2 Setting the softening
system
Set the device to the water hardness
level.
Determine the water hardness level
1.
and the appropriate setting value.
→ "Overview of the water
hardness settings", page 31
press.
2.
Hold down program button A and
3.
Press until the display
shows H:xx.
Program button A and
4.
sen.
aThe program button A flashes and
the display shows H:04.
Press program button C repeatedly
5.
until the appropriate water hardness
level is set.
To save the setting, press .
6.

11.3 Special salt

You can soften water with special
salt.
Pour in special salt
If the special salt refill indicator lights
up, fill special salt into the special salt
storage container immediately before
starting the program. The amount of
special salt required depends on the
degree of water hardness. Je
32
The higher the water hardness, the
higher the amount of special salt
required.
DANGER!
Cleaner can damage the softening
system.
Only fill the storage container of
▶
the softening system with special
salt for dishwashers.
Special salt can damage the washing
container through corrosion.
▶ To ensure that overflowed special
salt is rinsed out of the rinsing
container, fill the special salt into the
special salt storage container
immediately before the program
starts.
Unscrew and remove the lid from
1.
the special salt storage container.
When using for the first time: Fill
2.
the storage container completely
with water.
let go-