Table of Contents
Advertisement
2
External component identification
Right side
Component
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Hard drive light
Memory card reader
USB 3.0 ports (2)
HDMI port
RJ-45 (network) jack/status lights
AC adapter light
Power connector
Security cable slot
Description
●
Blinking white: The hard drive is being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the hard
drive.
Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
Hold the card label-side up, with connectors facing the slot,
insert the card into the slot, and then push in on the card until it
is firmly seated.
To remove a card:
Press in on the card it until it pops out.
Each USB 3.0 port connects an optional USB device, such as a
keyboard, mouse, external drive, printer, scanner or USB hub.
Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio component,
or a high-speed HDMI device.
Connects a network cable.
●
White: The network is connected.
●
Amber: Activity is occurring on the network.
●
On: The AC adapter is connected and the battery is
charged.
●
Off: The computer is using battery power.
Connects an AC adapter.
Attaches an optional security cable to the computer.
NOTE:
The security cable is designed to act as a deterrent, but
it may not prevent the computer from being mishandled or
stolen.
Right side
3
Advertisement
Table of Contents
