Table of Contents
Advertisement
2
External component identification
Right side
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Memory card reader
Drive light (select products only)
USB 3.0 port
HDMI port
RJ-45 (network) jack/status lights
Power connector
AC adapter and battery light
Description
Reads optional memory cards that enable you to store,
manage, share, or access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the
computer.
2.
Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
▲
Press in on the card, and then remove it from the
memory card reader.
●
Blinking white: The hard drive is being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the
hard drive (select products only).
Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner, or USB hub.
Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio
component, or a high-speed High Definition Multimedia
Interface (HDMI) device.
Connects a network cable.
●
White: The network is connected.
●
Amber: Activity is occurring on the network.
Connects an AC adapter.
●
White: The AC adapter is connected and the battery is
fully charged.
●
Blinking white: The AC adapter is disconnected and the
battery has reached a low battery level.
Right side
9
Advertisement
Table of Contents
