Table of Contents
Advertisement
c.
Use a thin tool to lift the webcam module to disengage the adhesive that secures it to the display
(2), and then remove the webcam module (3).
3.
The touch screen display cable connects to the board at the bottom of the bezel. To disconnect the
touch screen display cable from the display bezel, pull the cable upward to disconnect.
NOTE:
The touch screen display cable is available in the cable kit using spare part number
774593-001 for HD panels and 774594-001 for FHD panels.
4.
The display/webcam cable connects to the bottom of the display panel. To remove the display/webcam
cable:
NOTE:
The display/webcam cable is available in the cable kit using spare part number 774593-001 for
HD models and 774594-001 for FHD models.
a.
Position the display bezel/display panel assembly upside-down.
b.
Disconnect the display cable from the connector at the bottom of the display panel (1).
c.
Disconnect the webcam cable from the webcam (2).
d.
Remove the cable from the routing path and clips along the right side of the display bezel (3).
Component replacement procedures
55
Advertisement
Table of Contents
