Daikin MC80ZBFVM3 Operational Manual page 25

2
Press to change the setting*.
Each press cycles between ON and OFF.
ON OFF
Press to change the setting*.
Each press cycles between Low, Normal, High.
Low
Normal
* If the lamps do not change even after the settings were changed, unplug the unit, wait at least 5 seconds, then re-insert the
power supply plug and repeat the above procedure from the beginning.
Press
A short beep sounds with the
CIRCULATOR MODE lamp blinking
while the FAN lamp blinks according to
the new setting.
ON
Press
FAN
A short beep sounds and the
FAN lamp blinks according to the
new setting.
High
Low
3
.
While the lamp is blinking,
unplug the power supply plug,
wait at least 5 seconds, and
then insert the power supply
Blinking
plug again.
Setting is now complete.
OFF
.
• If this procedure is not
• Settings are remembered even
if the unit is unplugged.
Normal High
Advanced Settings
4
Power supply
plug
Power
socket
performed, the unit will not
return to the regular operation
mode.
24