Daikin MC80ZBFVM3 Operational Manual page 27

2
Press to change the setting*.
Each press cycles between ON and OFF.
Lit up
ON
Press to change the setting*.
MODE
The airflow rate switches between 4 Levels
and 3 Levels with each press.
Lit up
Unlit
4 Levels
3 Levels
* If the lamps do not change even after the settings were changed, unplug the unit, wait at least 5 seconds, then re-insert the
power supply plug and repeat the above procedure from the beginning.
Press
MODE
A short beep sounds, the FAN lamp
(Quiet) blinks, and the ECONO MODE
lamp changes to the following display
according to the setting.
Unlit
OFF
Blinking
Press
A short beep sounds, AUTO FAN
MODE lamp blinks, and the FAN lamp
changes as below according to the new
setting.
4 Levels
3
.
Blinking
Unlit
ON OFF
.
Blinking
Lit up
Unlit
3 Levels
Advanced Settings
4
While the lamp is blinking,
unplug the power supply plug,
wait at least 5 seconds, and
then insert the power supply
plug again.
Setting is now complete.
Power supply
plug
Power
socket
• If this procedure is not
performed, the unit will not
return to the regular operation
mode.
• Settings are remembered even
if the unit is unplugged.
26