Page 1
Box Contents OpenEye C3012T4B-S cameras come with self-tapping screws and plastic anchors mounting template, and waterproof cable connector. Identify the following components to make sure everything has been properly included with your new recorder. If any of the following items are missing, contact the dealer to arrange a replacement.
Page 2
Sourcing Equipment (PSE) switch is available. Ensure that the camera’s power cable is correctly and firmly connected. NOTE: OpenEye recommends against using more than one power source at a time. Do not use a PoE power source when providing the camera with 12vDC power.
Page 3
Assigning an IP Address OpenEye IP cameras are set to DHCP by default. If a DHCP server is not detected after 2 minutes, the camera will default to IP address 192.168.51.2. If you are not using a DHCP server, NCM will allow you to batch configure a static IP address.
Page 4
Pan / Tilt / Rotate Tilt: 0° ~ 75° Rotate: 0° ~ 360° IP Rating IP67 Impact Rating IK10 Related Links Network Camera Manager Advanced Camera Management Adding Cameras and Camera Settings OE-C3012T4B-S https://answers.openeye.net/Install/Hardware_and_OS/Cameras/OpenEye_Cameras/OE-C3012T4B-S/OE-C3012T4B-S_Qui… Updated: Thu, 08 Feb 2024 23:02:08 GMT Powered by...
Need help?
Do you have a question about the C3012T4B-S and is the answer not in the manual?
Questions and answers