Function Of The Connected Vtr - Sony DXC-325P Service Manual

Function of the Connected VTR
VTR M
Audio Picture shown Cable
For VTRs with "No" in the column "Power Supply from
VTR to Camera", the power supply from the VTR is
insufficient to operate a camera. Therefore, the
independent power source must be provided for the
camera. If the camera is operated without being powered
independently, heat will build up in the VTR or AC power
adaptor, and the protective circuit will activate.
Consequently, the VTR or AC power adaptor will not
operate properly.
When the VO-6800/6800PS portable VTR is connected to
the camera, the VTR's —20 dB/-60dB camera microphone
input level selector is set to -60 dB,
A picture from a VTR can be seen only when the REST
button is pressed.
DXC -325 (UC)
DXC-325P (EK)
If the operating conditions of the VTR are different from
those shown above, the VTR might not operate normally.
If you use a VTR other than those shown above, for which
the VTR selector must be set to "3" or "4, check the signal
levels and other operating conditions.
CUPEEE
CCAI NCCC