Continuous Shooting - Contax TVS DIGITAL Instruction Manual

7.
"C MENU" Photography
When the shutter release button is pressed in drive mode "C", three frames are taken in standard
exposure, overexposure and underexposure.
• The focus set for the first photo is used for all three photos.
• If the set compensation range exceeds the camera's exposure limits, the photos are taken at maximum
possible compensation values.
• tfou can change the exposure order to over -• standard -* unoer. (P88)
• Shooting cannot be performed when there are iess tha/t three frames ieft (in drive mode "C").
5 Continuous Shooting "C"
The continuous shooting mode allows you to shoot a sequence of pictures as long as the
shutter release button is depressed.
I
Set the mode dial to "P" or "Av" and turn
on the camera.
2
Press the "C MENU" button and use "•<" or
on the " button to select "DRIVE".
3
Use
"A"
on the "• •" button to select "C"
and press the "C MENU" button.
The camera returns to the exposure screen and shows
the C icon. This completes all the settings.
• The Hash mode is set to " (Flash-off).
4
Focus on the subject and fully depress the
shutter release button.
Exposures are made as long as the shutter release
button is depressed.
• Continuous shooting is performed at a rate of 2 frames per
second for the first three frames.
Subsequent frames are shot at a speed that is determined by
the time it lakes to find free space in the memory.
• When fill-ir Hash mode is selected, continuous shooting is performed with intervals to enable the flash to
charge.
• The remote control cannot be used during continuous shooting.
51