Playing Movies.82 - Contax TVS DIGITAL Instruction Manual

1. Playing Movies
Connect the camera to the AC adapter for long shooting
sessions.
• Check that a memory card is inserteO.
I
Set the mode dial to "ITI" and turn on the
camera.
The screen in the figure is displayed during movie
playback.
2
Use "«e" or on the " " button to
select the image to play back.
• Use multiple playback (P69) to simplify selection when the
card contains many images.
3
Press the ".iJ" button to start playback and
the playback screen shown in the
illustration appears.
Use "•«" or to toggle between frame-by-frame
playback either in forward or reverse direction during
playback. When the buttons are held down more than
two seconds, images are continuously played frame-by-
frame either in forward or reverse direction.
Use
"A"
or
"T"
during playback to adjust the sound
volume.
• Pressing the button during Irame-by-lrame playback
either in forward or reverse direction starts movie playback.
• Sound Is muted during frame-by-frame playback or reverse
frame-by-frame playback.
/y
Press the
"jM"
button to stop playback.
Use or to select the next image to play back.
82