Installing And Removing - Contax TVS DIGITAL Instruction Manual

2
.
Installing and Removing the Memory Card
<Card removal>
<lnstalling the memory card>
1 Open the memory card door.
Slide the memory card door release to open the card
door.
2 Insert the memory card.
Slide in the memory card until It stops with a secure
click
e
Tails
cars
to
insert
the
Tierrory
card In ths'lpht direction
^ Close the memory card door.
• Do not attach a seal, etc. on ihe memory card II you do so.
you may not be able to remoye the memory card.
<Rernoval>
■ Gently press the memory card to eject it and take it
out holding the edges of the caid as shown at r in the
illustration.
<SD card write protect switch>
Write proiecl switch
As shown In the Illustration, an SD memory caid Is
provided with a write protect switch.
When this switch is moved down, further recording on
the card Is disabled to protect any images and data
already on the card. In this status, Images cannot be
recorded and Images on the card cannot be erased.
The LCD monitor will display "WRITE PROTECT".
lb