Chapter 2. Getting Started; Install A Sim Card And The Battery; Power On Your Linkzone - TCL LINKZONE User Manual

Chapter 2. Getting Started

This chapter introduces the basic instructions on how to get your LINKZONE up and running.
The instructions may vary depending on your LINKZONE model.

2.1 Install a SIM card and the battery

To install a SIM card and the battery:
①
1. Remove the back cover as illustrated in the picture 1.
2. Press and slide a SIM card into the slot until the card sits properly. Heed the orientation
of the SIM card.
3. Align the pins and press the battery down until it is properly installed.
4. Close the back cover with the loophole aligned.
NOTE
Remove the battery if your LinkZone will not be used for more than one week.

2.2 Power on your LINKZONE

To power on your LINKZONE, press and hold the power button for 3 seconds. The indicators
will flash solid blue.
SIM
②
3s
3
③ ④