TCL LINKZONE User Manual page 13

Set as default
Network settings
You can set the network search mode to Auto, 3G only, 4G/LTE only, and change the
network mode.
Make sure you click
Wi-Fi
Basic
Configure basic Wi‑Fi settings in this option.
SSID
SSID Broadcast
Security
Encryption
Wi‑Fi Password
Advanced
Configure advanced Wi‑Fi settings in this option.
Max. connected
devices
802.11 mode
AP isolation
Channel bandwidth
Guest network
In this tab, you can enable or disable the
Wi‑Fi name, Wi‑Fi password, and validity duration. Devices connected to the guest network
1. Select the profile from the profile management list.
2. Click Set as
Apply after making desired changes.
SSID is the name of the wireless network.
This function is enabled by default.
When this function is disabled, other users cannot detect the SSID or
the Wi‑Fi name. They need to manually enter SSID to connect to your
LinkZone network.
The available security modes include Disable, WPA2, WPA/WPA2,
WPA2/WPA3, WPA3.
The available option is AES.
Check the Wi‑Fi password in this item.
You can decide how many client devices can connect to your
LinkZone network at a time.
The mode is set to 2.4 GHz (802.11b, 802.11b/g, and 802.11b/g/n) or
5 GHz (Auto, 802.11a, 802.11an, and 802.11ac).
The AP isolation function enables you to create a separate virtual
network for each wireless client that is connected to your LinkZone
network. When this function is enabled, all wireless devices in the
network will not be able to communicate with each other.
Select the available options from the drop‑down menu.
default.
Guest network feature, and configure guest network
10