TCL LINKZONE User Manual page 5

6. Micro USB Port
7. Reset Button
Factory reset
Press the RESET button for 3 seconds to reset your LINKZONE.
NOTES
• When the LINKZONE downloads and installs software updates, you will see the
LEDs flash on and off in a sequence. Do not power off your LINKZONE during
this process as it may cause device malfunction.
• Power Saving Mode:
• If your LinkZone has been idle for 30 seconds, all indicators except the battery
indicator will automatically turn off. Press any button to turn all the indicators on.
• If the Wi‑Fi network hasn't been used for over 10 minutes, your LinkZone will be
disconnected from the network. Press any button to resume network connection.
• If your LinkZone accesses the Wi‑Fi network within 10 minutes, the network will
be re‑connected.
• Connect to a power supply (5 V/1 A) using the provided
USB cable.
• NOTE The provided USB cable is intended for charging
only.
Use a paperclip to press the button for 3 seconds to reset
the device.
2