Smoking or burning objects (hot coals, WARNING or unsafe conditions. cigarette butts, or matches) 33. Use only with Shark battery pack To reduce the risk of fire, electric shock, injury, or property damage: f) Flammable or combustible materials XSBT330AS.
Page 3
ASSEMBLY ASSEMBLY STORE HANDHELD VACUUM 1. Slide the Wand onto the neck of the PowerFins™ 4. Place the dock on the floor near a wall outlet. Floor Nozzle until it clicks into place. Plug the Power Cord into the outlet, then connect the cord to the port on the back of the 2.
When the Shark® Li-Ion battery needs to be replaced, dispose of it or recycle it in accordance When charging is complete and you need to To reattach the hand vacuum to the wand, align the with local ordinances or regulations.
CONTROLS CLEANING MODES POWER AND DEEP CLEAN MODE ECO AND BOOST MODE FLOOR NOZZLE ABOVE-FLOOR WITH ACCESSORY Press the On/Off button on the handle to While cleaning, press and release the Use the floor nozzle for powerful cleaning on Attach desired accessory to handheld turn on power.
CLEANING MODES MAINTAINING YOUR VACUUM EMPTYING THE DUST CUP USING ACCESSORIES PET MULTI-TOOL Empty the dust cup after each use. A single convertible tool for cleaning tough pet messes two ways: use the stiff bristle brush to clean stuck-on debris, or take off the bristles to reveal an upholstery tool perfect for removing stubborn pet hair and large piles of debris.
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CHECKING FOR BLOCKAGES NOZZLE MAINTENANCE POWERFINS™ FLOOR NOZZLE Checking for Blockages in the Handheld Vacuum: 1. Turn off the vacuum. 2. Remove the handheld vacuum from the wand. 3. Check all intake openings to the dust cup and remove any debris or blockages.
NOTE: Not all accessories come with all units. Please see Included Items lists on pages 4 and 5 for your unit's configuration. To order additional accessories, visit sharkninja.sg | sharkninja.my. NOTE: If vacuum still does not operate properly, contact Shark Customer Support. sharkninja.com.ph...
Page 9
• Accidental damage. • Damage as a result of use not in accordance with the rating plate. • Removal of blockages. If a blockage does occur, please refer to the trouble shooting guide within your Shark Operating manual. • Use of parts and accessories that are not genuine Shark components.
Page 10
NOTES NOTES sharkninja.com.ph s h a r k n i n j a . c o m . p h...