Shark EVOPOWER CS850SM Series Owner's Manual page 3

1. Slide Wand onto Floor Nozzle.
2. Slide Hand Vacuum onto wand.
For proper operation, ensure all components are
completely connected and clicked into place.
3. Make sure the Dock Plate is facing upright.
Slide the Charging Post into the slot on the
back of the dock until it clicks into place.
Handheld Vacuum
(Main Body)
2.
Wand
1.
PowerFins™
Nozzle
sharkninja.sg
ASSEMBLY
4. Place the dock on the floor near a wall
outlet. Plug the Charging Adapter into the
outlet, then connect the cord to the port
on the accessories post.
5. Store crevice nozzle with brush on the
mount on the dock plate.
6. Slide the Accessory Storage Attachment
into the slot on the side of the dock plate
until it clicks into place. Store accessories
on the attachment.
Charging Post
3.
Dock
Plate
Assembled
Dock
4.
5. Store
Accessories
6.
Accessory Storage
Attachment
STORE HANDHELD VACUUM
cre
STORE ACCESSORIES
Accessory
Storage
Attachment
Dock Plate
ASSEMBLY
To store the vacuum with the wand and floor nozzle
attached, place it on the dock plate, with the hook
on the back of the wand over the charging post. To
charge, make sure the contacts on the wand are
aligned with the contacts on the charging post.
To remove the vacuum from the dock, lift it by the
handle on the handheld vacuum.
Store the Duster Crevice Tool on the mount on the
dock plate.
Store the Upholstery Tool and the Wide Upholstery
Tool on the accessory storage attachment.
NOTE: The accessory storage attachment can be
attached to either side of the main dock plate.
s h a r k n i n j a . m y