Amcrest IP2M-852EB User Manual page 90

To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
5.4.2.2. Connection
The Connection menu item has two tabs: Connection and ONVIF.
5.4.2.2.1 Connection
The Connection tab is where users can configure port connections. Below is a screenshot of the Connection
settings tab:
Below is an explanation of the fields on the Connection settings tab:
•
Max Connections: This field allows the user to specify the maximum number of users that can be connected
to the camera at the same time. The maximum number of users the camera can support at one time is 20.
•
TCP Port: This field designates the Transmission Control Protocol (TCP) port number. The default value is
37777.
•
UDP Port: This field designates the User Datagram Protocol (UDP) port number. The default value is
37778.
HTTP Port: This field designates the Hypertext Transfer Protocol (HTTP) port number. The default value is 80.
•
RTSP Port: This field designates the Real Time Streaming Protocol (RTSP) port number. The default value is
554.
•
HTTPS: This field enables the use of the HTTPS protocol for accessing the camera.
•
HTTPS Port: This field designates the Hypertext Transfer Protocol Secure (HTTPS) port number. The default
value is 443.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
90