Advertisement
Light Source
LED
Maintenance
Apart from cleaning the product's exterior surfaces, no special maintenance work is required.
Do not use high-pressure cleaners.
In case of component failure due to abnormal circumstances or at end of life, replacement must be carried
out by a suitably qualified and trained professional.
Warning: Do not open luminaire while mains supply is switched on.
Caution: Risk of electric shock!
Installation
The product must be installed and maintained by a suitably qualified professional in compliance
with latest building/construction and/or electrical regulations and relevant legislation.
Warning: Switch off mains electrical supply prior to installing and connecting the luminaire.
Caution: Risk of electric shock!
Notice: If the luminaire is modified by anybody other than the original manufacturer, then the warranty will
no longer be valid and shall become the full responsibility of the modifying person/organisation. Claims
based on defects attributable to improper installation and/or application, and the consequences thereof,
are excluded.
Attention: The luminaire is factory-sealed and does not need to be opened during installation.
The installation on site must comply with local and/or national health and safety regulations.
2
Advertisement
