Download
Share
Print this page
WE-EF LTM440-FT Installation And Maintenance Instructions Manual
  1. Manuals
  2. Brands
  3. WE-EF Manuals
  4. Outdoor Light
  5. LTM440-FT
  6. Installation and maintenance instructions manual

WE-EF LTM440-FT Installation And Maintenance Instructions Manual

Light column
Hide thumbs Also See for LTM440-FT:

Advertisement

Quick Links

Download this manual
Surge Protection
This product features built-in surge protection circuitry in compliance with
applicable standards.
For comprehensive protection of a luminaire installation against lightning and
electrical surges, it is essential to cover mains supply and data input lines at
the distribution board level, by using respective primary (Type 1) and secondary
(Type 2) surge arrestors in compliance with EN61643-11/IEC61643-1.
Warning
Ensure that all required surge protection measures are in place and activated
prior to luminaire installation. Also, disconnect luminaires before operating
high-power devices such as, for example, electrical arc welders.
WE-EF LEUCHTEN
Installation and Maintenance
Instructions
Light column
LTM440-FT
LTM440

Advertisement

loading
Need help?

Need help?

Do you have a question about the LTM440-FT and is the answer not in the manual?

Questions and answers

Related Manuals for WE-EF LTM440-FT

Summary of Contents for WE-EF LTM440-FT

  • Page 1 WE-EF LEUCHTEN Installation and Maintenance Instructions Light column LTM440-FT LTM440 Surge Protection This product features built-in surge protection circuitry in compliance with applicable standards. For comprehensive protection of a luminaire installation against lightning and electrical surges, it is essential to cover mains supply and data input lines at the distribution board level, by using respective primary (Type 1) and secondary (Type 2) surge arrestors in compliance with EN61643-11/IEC61643-1.
  • Page 2 Light column LTM440-FT LTM440 IP55, IK09, Class I, ta = 40°C...

  • Page 3: Maintenance

    Light Source Maintenance Apart from cleaning the outside of the luminaire, no special maintenance is necessary. Warning: Do not open luminaire while mains supply is switched on.

  • Page 4: Installation Procedure

    Installation Installation Procedure The product must be installed and maintained by a It is recommended to incorporate the optional WE-EF planted root to ensure maximum stability. building/construction and/or electrical regulations and 1) Switch off mains electrical supply. relevant legislation. 2) Check that rating shown on luminaire label conforms with mains electrical supply.
  • Page 6 Cable connecting box EK70...
  • Page 7 WE-EF HELVETICA WE-EF LIGHTING Switzerland United States of America Tel +41 22 752 49 94 Tel +1 724 742 0030 Fax +41 22 752 49 74 Fax +1 724 742 0035 info.switzerland@we-ef.com info.usa@we-ef.com TO9230W0420 © WE-EF 2020 subject to change.
  • Page 8 WE-EF LEUCHTEN Installation and Maintenance Instructions Planted Root ESV4 ESV2 ESV6...
  • Page 9 Planted Root ESV4 300-0461 ESV4 300-0464 Suitability Suitability 1. KTX234 1. CFY259 2. KTY234 2. GRY234 3. ZFY230 3. RRY324 4. GRY224 4. RRZ324 5. Short post 5. XRY324 6. XRZ324 ESV4 300-0586 ESV4 300-0459 Suitability Suitability 1. XRY334 1. QSI254 2.
  • Page 10 Planted Root ESV2 300-9115 ESV6 300-0457 Suitability Suitability 1. PSY414/424 1. LTM440 2. LTM444 3. AMW-C 4. AMF-C 5. AMF-S 6. AML-C ESV6 300-0824 Suitability 1. AML-C 2. FLA461...

  • Page 11: Installation Instruction

    Installation Instruction 1) Note: It is the responsibility to installer to 2) Please note, ESV4 and ESV6 must be ensure the suitability of the ESV planted root orientated correctly for different products. for any local or national structural requirements In both instances conduit entry can be rotated for installation, and that planted root is suitable to match cable routing.
  • Page 12 5) For all other product that use ESV6 please orientate planted root as shown (base plate connections/conduit. is parallel to the pathway). For this installation, use 40 mm long M16 bolts supplie. 7) Place the ESV in the form work for concrete 8) Fit the nominated bolts through mounting pad, ensuring orientation, position and levels are correct.
  • Page 13 9) Pour concrete to desired level depending on requirement of soil, paver or concrete. Ensure (as per luminaire instructions) onto mounting Concrete Paver Soil...
  • Page 14 WE-EF HELVETICA WE-EF LIGHTING Switzerland United States of America Tel +41 22 752 49 94 Tel +1 724 742 0030 Fax +41 22 752 49 74 Fax +1 724 742 0035 info.switzerland@we-ef.com info.usa@we-ef.com TO9257W0420 © WE-EF 2020 subject to change.

This manual is also suitable for:

Ltm440