Advertisement
50 Series Non-Hold Open Closer
50 Series Regular Arm Installation (Right Hand Shown)
1. Prepare door and frame.
1-1/4
(32)
2. Mount closer to door.
4. Connect arms and install forearm
screw.
The 50 Series Non Hold Open Closer - Regular Arm has now been installed.
��
Go to page 2 for closer adjustments and decorative cap or cover installation.
Copyright © 2016, 2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permis-
sion of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
80-9350-2531-010 Rev 2 02/23
6
A
(152)
3/4
(19)
9-1/16
(230)
3. Choose arm placement in shoe and install arms.
or
1st
2nd
Approved 2023-02-24
1-3/4
3
(44)
7/8
(22)
Opening
to 100°
101° to 120°
*121° to 180°
*Door/Wall/Hardware/Jamb conditions permitting
2nd
1st
7-1/2%
Stronger
+
–
7-1/2%
Weaker
5. Preload spring and tighten forearm screw.
Rotate elbow until
Connecting Rod is
perpendicular to frame.
Dimension "A"
7 (178)
6 (152)
3-1/2 (89)
RH and LH:
Position flat at S
or
x2
Rotating arm preloads
closer spring power.
2nd
1st
3
Advertisement
