Download Print this page
Yale 7110 Installation Instructions Manual

Yale 7110 Installation Instructions Manual

Surface vertical rod exit device series
Hide thumbs Also See for 7110:

Advertisement

Quick Links

Top Mounting Plate
(2) 1/4-20 X 3/4" PFHMS
(Metal Door)
or
(2) #14 x 1-1/2" PFH"AB"SMS
(Wood Door)
Rod Guide
(2) #8 x 1/2" (13mm) PRH"AB"SMS
Top Rod
Roll Pin
Bottom Rod Assembly
Rod Guide
(2) #8 x 1/2" (13mm) PRH"AB"SMS
Bottom Mounting Plate
(2) 1/4-20 X 3/4" PFHMS
(Metal Door)
or
(2) #14 x 1-1/2" PFH"AB"SMS
(Wood Door)
790 Strike
An ASSA ABLOY Group brand
7110(F), 7170(F)(LBR)
Surface Vertical Rod Exit Device Series
Installation Instructions
Shim (2) Supplied
Strike Plate
791 Strike
(3) 10-24 x 3/4" (19mm) PFHMS
Top Latch
(Panic & Fire Label)
(3) 10-24 x 1/4" (6mm) PPHMS
(2) 8-32 x 1/4" (6mm) PFHMS
Latch Cover
(2) #6 x 3/8" (10mm) PTH"AB"SMS
'
Guide Cover
Top Rod Connector
(2) 1/4-20 X 1" PPHMS
(Metal Door)
or
(2) #14 x 1-1/2" PPH"AB"SMS
(Wood Door)
(2) 8-32 x 5/16" (8mm) PFHUMS
(2) #6 x 3/8" (10mm)
PTH"AB"SMS
Guide Cover
Deadbolt
Bottom Bolt Case
Panic & Fire Label
(3) 10-24 x 1/4" (6mm)
PPHMS
(2) 8-32 x 1/4" (6mm) PFHMS
Bolt Case Cover
Strike Angle Must
Engage Strike
End Clamp
Hole Plug
(Fire Label Devices)
Dogging Key
Cover
FASTENER DESCRIPTION
ABBREVIATION
PPH"AB"SMS
PHILLIPS PAN HEAD TYPE "AB" SHEET METAL SCREW
PFHUMS
PHILLIPS FLAT HEAD UNDER CUT MACHINE SCREW
PFHMS
PHILLIPS FLAT HEAD MACHINE SCREW
PHILLIPS ROUND HEAD TYPE "AB" SHEET METAL SCREW
PRH"AB"SMS
PTH"AB"SMS
PHILLIPS TRUSS HEAD TYPE "AB" SHEET METAL SCREW
PPHMS
PHILLIPS PAN HEAD MACHINE SCREW
PFH"AB"SMS
PHILLIPS FLAT HEAD TYPE "AB" SHEET METAL SCREW
PRHMS
PHILLIPS ROUND HEAD METAL SCREW
All dimensions are in inches (mm) unless otherwise noted.
726
Top Strike
12-24
PRHMS
Top bracket and 726 strike
required for 7170(F)(LBR).
(3) 8-32 x 5/16"
PFHUMS
End Cap
(2) 1/4-20 X 1" PPHMS
(Metal Door)
or
(2) #14 x 1-1/2" PPH"AB"SMS
(Wood Door)
Dogging
Feature to hold bolts retracted and
touchpad depressed, for push-pull door
operation.
To Dog Device
1. Insert dogging key.
2. Hold touchbar depressed.
3. Turn key 1/4 turn clockwise.
(Not a feature of fire labeled devices.)
80-9470-0010-000 (03-13)

Advertisement

loading

Summary of Contents for Yale 7110

  • Page 1 7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions Strike Angle Must Engage Strike Shim (2) Supplied Top Strike Strike Plate 791 Strike 12-24 PRHMS (3) 10-24 x 3/4" (19mm) PFHMS Top Mounting Plate Top bracket and 726 strike Top Latch required for 7170(F)(LBR).
  • Page 2: Maintenance

    Unreinforced Frames: Use Blind Rivet Nuts. Recommended fasteners for unreinforced openings Door Must Swing Freely Reinforcement are not necessarily supplied by Yale Locks and Hardware. Door Skin Blind Rivet Nut 1. Mark Door Single Door or Pair without Mullion...
  • Page 3 3. Size Device Device must be field cut to size, as required Determine device length * LHR Door (Door Open) 1. Close door. Measure 2-1/4" (57mm) inside face STILE from the Stop Surface on the hinge side of the door, mark Horizontal Reference at this point.
  • Page 4: Complete Installation

    5. Rod Preparation & Assembly 7. Complete Installation Shim Note: Below listed instructions are based on a device (2) Supplied (Start With One) Top Strike Detail mounted 39-15/16" (1014mm) from finished floor or threshold. Any deviation on device mounting Strike Plate 791 Strike height must be accommodated to insure proper (Ridges Face Down)
  • Page 5 TOP LATCH & BOTTOM 791 STRIKE BOLT CASE (7110 only) TAPE TO FRAME STOP 16 " " TAPE TO DOOR STOP " #26 (.147" DIA) DRILL 10-24 TAP (2 HOLES) ALIGN WITH RODS FOLD LINE (STOP LINE) 4 " HOLE 'A'...
  • Page 6 This page left blank intentionally. 80-9470-0010-000 (03-13) An ASSA ABLOY Group brand...
  • Page 7 DEVICE TEMPLATE LHR DOOR 790 STRIKE 16 " 8 " (16) DIA. X 3/4 (19) DEEP 8 " " FOLD LINE TAPE TO DOOR FACE " ALIGN WITH OF RODS 16 " 80-9470-0010-000 (03-13) An ASSA ABLOY Group brand...
  • Page 8 This page left blank intentionally. 80-9470-0010-000 (03-13) An ASSA ABLOY Group brand...
  • Page 9 TAPE THIS TAB TO FRAME STOP 726 STRIKE 1/4" 1/4" 3/4" 3/4" (19) (19) 1/8" 1/8" 3/4" 3/4" (19) (19) FOLD (STOP LINE) 2-1/4" (57) ALIGN WITH OF RODS 1-5/16" Strike Angle Must (33) Engage Strike Top Strike 12-24 PRHMS DOOR FASTNER HOLE 'A'...
  • Page 10 Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company. Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only.

This manual is also suitable for:

7110f7170lbr7170flbr