Notes On The Documentation - Beckhoff CU8110-0060 Manual

Notes on the documentation

1 Notes on the documentation
This description is intended exclusively for trained specialists in control and automation technology who are
familiar with the applicable national standards.
For installation and commissioning of the components, it is absolutely necessary to comply with the
documentation and the following notes and explanations.
The qualified personnel is always obliged to use the currently valid documentation.
The responsible staff must ensure that the application or use of the products described satisfies all safety
requirements, including all the relevant laws, regulations, guidelines, and standards.
Disclaimer
The documentation has been prepared with care. The products described are, however, constantly under
development.
We reserve the right to revise and change the documentation at any time and without notice.
No claims to modify products that have already been supplied may be made on the basis of the data,
diagrams, and descriptions in this documentation.
Trademarks
® ® ® ® ® ® ® ®
Beckhoff , TwinCAT , TwinCAT/BSD , TC/BSD , EtherCAT , EtherCAT G , EtherCAT G10 , EtherCAT P ,
® ® ® ® ®
Safety over EtherCAT , TwinSAFE , XFC , XTS and XPlanar are registered and licensed trademarks of
Beckhoff Automation GmbH.
If third parties make use of designations or trademarks used in this publication for their own purposes, this
could infringe upon the rights of the owners of the said designations.
Patents
The EtherCAT Technology is covered by the following patent applications and patents, without this
constituting an exhaustive list:
EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702
and similar applications and registrations in several other countries.
®
EtherCAT is registered trademark and patented technology, licensed by Beckhoff Automation GmbH,
Germany
Copyright
© Beckhoff Automation GmbH & Co. KG, Germany.
The distribution and reproduction of this document, as well as the use and communication of its contents
without express authorization, are prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event that a patent, utility
model, or design are registered.
CU8110-0060 Version: 1.0 5