Product Overview; Structure; Table 2 Key For The Structure; Fig. 1 Structure Of A Cu8110-0060 Ups - Beckhoff CU8110-0060 Manual

4

Product overview

UPS-OCT availability
UPS-OCT should be available from Q2 2024 (new hardware required).
The CU8110-0060 is a capacitive uninterruptible power supply (UPS) based on double-layer capacitors
(EDLC) with a maximum energy of 0.3 Wh and a maximum power output of max. 55 W.
In the event of a fault or the failure in the 24 V DC input voltage, the UPS takes over the supply of power to
the connected devices with a controlled and buffered 24 V DC output voltage. All Beckhoff components or
components from third parties, especially industrial PCs, embedded PCs, panels and panel PCs, can be
equipped with the CU81xx UPS series. The UPS has a total of two 24-V outputs. In addition to the industrial
PC, a panel or terminal segment can be supplied with uninterrupted power on the second output.
OCT (One Cable Technology), USB 2.0, and digital signals are available for communication between the
UPS and the industrial PC. A special feature of OCT is that the connecting lines (+24 V, 0 V) between the
industrial PC and UPS are used not only to supply power to the industrial PC, but also for bidirectional,
modulated data transmission.
4.1

Structure

4
3
2
1
Fig. 1: Structure of a CU8110-0060 UPS.
Table 2: Key for the structure.
No. Component
1
Power supply (X102)
[} 16].
2
Control inputs and control
outputs (X102) [} 16].
3
USB 2.0 interface (X101)
[} 15].
4
Diagnostic LED [} 45]
CU8110-0060
Description
Interface for power supply to the UPS (Uin) and the devices being
supported (U1out and U2out). The wiring is done via a 9-pin push-
in connector.
Interface for digital control inputs (UPS EN, P SHDN) and digital
status outputs (UPS RDY, P FAIL).
Communication interface between UPS and industrial PC for
devices without UPS-OCT. Status queries, device status, or
shutdown are possible.
Indicate the state of the input voltage, output voltage, and errors.
Version: 1.0
Product overview
11