Beckhoff CU8110-0060 Manual page 42

Configuration
Status in- Beckhoff BAPI
formation v1
Requirements
Development en- Target platform
vironment
TwinCAT v3.1.0 PC or CX (x86, x64, ARM)
42
Beckhoff Beckhoff 24V
P24Vxxxx UPS UPS on the
CP903x card
Service Interval
Notify (bit 10
set). The
configured
battery change
interval service
has expired.
Implemented in
the UPS software
version >=
3.0.0.8;
Version: 1.0
CX2100-09x4 APC
Back-
UPS
Pro
280
battery service
interval has
expired.
Under
Temperature (bit
11 set) was
detected and the
charging of the
battery was
interrupted.
Requires a newer
(second)
hardware
revision.
Implemented in the
UPS software
version >=
3.0.0.18.
Fuse Not Ok (bit
12 set). The
"Smart Battery"
fuse is defective or
not available.
Requires a newer
(second)
hardware
revision.
Implemented in the
UPS software
version >=
3.0.0.18.
UPS hardware
• Beckhoff BAPI v1;
• Beckhoff P24Vxxxx;
• Beckhoff CP903x card (PCI/ISA);
• Beckhoff CX2100-09x4 models
(e.g. CX2100-0904 or
CX2100-0914 + "Smart Battery"
CX2900-0192);
• The APC devices that come
supplied with Beckhoff Industrial
PC support the Smart protocol
and can be configured with the
Windows UPS service.
APC Description
Smart-
UPS 420
PLC libraries to be
integrated (cate-
gory group)
Tc2_IoFunctions
(IO)
CU8110-0060