Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Related Manuals for DeLonghi ECAM35X.15 Series
Summary of Contents for DeLonghi ECAM35X.15 Series
- Page 1 De’Longhi Appliances via Seitz, 47 31100 Treviso Italy www.delonghi.com...
- Page 2 ECAM35X.15 BEAN TO CUP ESPRESSO AND CAPPUCCINO MACHINE Instruction for Use Instruction videos available at: http://ecam35015.delonghi.com...
- Page 3 page 6...
- Page 6 0,5 L 1,8l...
-
Page 7: Table Of Contents
CONTENTS 18.6 Cleaning the water tank ......16 18.7 Cleaning the coffee spouts ......16 1. FUNDAMENTAL SAFETY WARNINGS .....7 18.8 Cleaning the pre-ground coffee funnel ..16 2. SAFETY WARNINGS ........8 18.9 Cleaning the infuser ........16 2.1 Symbols used in these instructions ....8 19. -
Page 8: Fundamental Safety Warnings
1. FUNDAMENTAL SAFETY WARNINGS • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 9: Safety Warnings
2. SAFETY WARNINGS 2.2 Designated use 2.1 Symbols used in these instructions This appliance is designed and made to prepare coffee and heat beverages. Important warnings are identified by these symbols. It is vital to Any other use is considered improper and thus dangerous. The respect these warnings. -
Page 10: Description
4. DESCRIPTION B13. : "Coffee" 4.1 Description of the appliance B13. : “Long” (page 3 - A) B14. ESC: A1. Beans container lid - on steadily: to turn the steam function on (when in the A2. Pre-ground coffee funnel lid settings menu: press to exit the current programming) A3. -
Page 11: Setting Up The Appliance
Connect the appliance to an efficiently earthed and correctly Each time the appliance is turned on, it performs an automatic installed socket with a minimum current rating of 10A only. preheat and rinse cycle which cannot be interrupted. The appli- If the power socket does not match the plug on the appliance, ance is ready for use only after completion of this cycle. -
Page 12: Auto-Off
2. Press and hold the icon (B9) until the lights on the 5. Press the OK icon (B15) to confirm (or touch screen (B) come on; (B14) to exit without making the change). The lights go off. 3. Press the icon (B10);... -
Page 13: Rinsing
These adjustments will only be evident after at least 2 cups of 3. Press the icon (B12). The beans (B7) on the touch coffee have been delivered. If this adjustment does not obtain screen flash; the desired result, turn the dial another click. OK icon (B15) to reset the default values 4. -
Page 14: Temporarily Varying The Coffee Aroma
≃ 120 ml 2x (B9) STRONG x 2 cups Espresso X-STRONG Lungo (B11) (see “15.5 Making coffee 5. Preparation begins and the light corresponding to the se- using pre-ground coffee”) lected icon flashes on the touch screen (B). Please note: Please note: •... -
Page 15: Customising Aroma And Quantity
5. Preparation begins and the light corresponding to the se- 4. Immerse the cappuccino maker in the milk container. lected icon flashes on the touch screen (B). Never immerse the black ring. Important! Making LONG coffee Important! Halfway through preparation, the light flashes. -
Page 16: Delivering Hot Water
17. DELIVERING HOT WATER 18.3 Cleaning the coffee grounds container When the light (B2) flashes, the coffee grounds container Important! Danger of burns. (A11) must be emptied and cleaned. The appliance cannot be Never leave the machine unattended while delivering hot water. used to make coffee until you have cleaned the grounds con- The spout of the cappuccino maker (A20) becomes hot during tainer. -
Page 17: Cleaning The Inside Of The Coffee Machine
18.5 Cleaning the inside of the coffee machine 5. Soak the infuser in water for about 5 minutes, then rinse under the tap; Danger of electric shock! Important! Before cleaning internal parts, the machine must be turned off RINSE WITH WATER ONLY (see section “7. -
Page 18: Setting Water Hardness
5. Pour the descaler (C3) into the tank up to level A (corre- 16. Place the container used to collect the rinsing water empty sponding to a 100ml pack) marked on the inner surface of under the cappuccino maker; the tank, then add a litre of water up to level B (fig. 24) and OK icon. -
Page 19: Setting Water Hardness
8. Position a container with a minimum capacity of 500ml medium under the cappuccino maker/hot water spout (A20). Deliver hot water by turning the steam/hot water dial high (A22) to the I position. 10. Deliver at least 500 ml of hot water, then turn the steam/ maximum to the O position. -
Page 20: Explanation Of Lights
24. EXPLANATION OF LIGHTS LIGHTS DISPLAYED POSSIBLE CAUSE REMEDY Insufficient water in the tank (A17) Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. FLASHING The tank (A17) is missing or not correctly Insert the tank correctly, pushing it as far as it in place will go until it clicks into place. - Page 21 The grinding is too fine and the coffee is Repeat coffee delivery and turn the grinding ad- delivered too slowly or not at all justment dial (A5 - fig. 8) one click clockwise to- wards "7" while the coffee mill is in operation. If after making at least 2 coffees delivery is still too FLASHING slow, repeat the correction procedure, turning...
-
Page 22: Troubleshooting
Turn the steam/hot water dial (A22) to the I posi- The water circuit is empty tion until delivery stops, then bring it back to the 0 position. If the alarm occurs while hot water or steam is being delivered, turn the dial to the 0 FLASH. - Page 23 The coffee is weak or not creamy enough. The coffee is ground too coarsely. Turn the grinding adjustment dial (A5) one click anticlockwise towards 1 while the coffee mill is in operation (fig. 8). Continue one click at a time until coffee delivery is satisfactory.
-
Page 24: Electrical Requirements
26. ELECTRICAL REQUIREMENTS Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the proce- dure outlined below.
Need help?
Do you have a question about the ECAM35X.15 Series and is the answer not in the manual?
Questions and answers
Il n'y a pas d'interupteur à l'arriére de la machine ECAM35X.15 Comment mettre en service
To operate the DeLonghi ECAM35X.15 Series machine without a switch at the back, plug the machine into the mains socket and press the main switch located on the front or side of the machine (identified as A6 in the manual). There is no mention of a switch at the back, so the main power is controlled by the front switch and plugging it in.
This answer is automatically generated
il n'y a pas d'interrupteur A6 ni à l'arriére de la machine ni à l'avant ni sur les cotés .Comment démarrer la premiére mise en marche ?
To start the initial setup for the DeLonghi ECAM35X.15 Series:
1. Connect the appliance to a properly earthed socket rated at least 10A.
2. Fill the water tank (A17), insert the water filter fully (A18), close the lid (A16), and place the tank back into the machine until it clicks.
3. Turn the appliance on by pressing button (A23). The light (B1) will flash to show the machine is heating up.
4. The machine will perform an automatic preheat and rinse cycle. Wait until this completes before use.
There is no need for an A6 switch to begin setup.
This answer is automatically generated
@Pere Il n'y a pas d'interrupteur à l'arriére
@Mr. Anderson Un voyant rouge est bien allumé au dessus de B2 mail il reste fixe ne clignote pas et rien ne se produit
machine ECAM35X.15 n' pas de bouton A6 à l'arrière .Comment démarrer la premiére mise en marche ?
To start the initial setup for the DeLonghi ECAM35X.15 machine without using the A6 button at the back, follow these steps:
1. Make sure the main switch at the back is pressed to the ON position.
2. Plug in the machine.
3. Fill the water tank (A17) with fresh water and insert it correctly until it clicks into place.
4. Insert the water filter into the tank if required, immersing it for 10 seconds to remove air bubbles before installation.
5. Turn the machine on from the front control panel.
6. Follow the on-screen instructions on the touch display to complete the setup.
No use of the A6 button is needed for these steps.
This answer is automatically generated
@Mr. Anderson Je n'ai pas d'interrupteur à l'arriére ni à l'avant
Ma machine ECAM35X.15 n'a aucun interrupteur à l'arriére ni à l'avant ni sur les cotés .Votre notice ne prévoitt pas ce cas ,vos réponses sont fausses A défaut d e réponse adéquat ce jour je ramène la machine et demande le remboursement