Related Manuals for Classic Exhibits eco systems ECO-2041
Summary of Contents for Classic Exhibits eco systems ECO-2041
- Page 1 © 2023 Order #XXXXX ECO-2041 - 10’ x 20’ ecoSmart Inline 10’ 20’ Plan View SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com...
-
Page 2: Plan View
© 2023 Order #XXXXX Plan View = 1 sq foot... -
Page 3: General Setup Instructions
© 2023 Order #XXXXX General Information General Setup Instructions - Read entire setup instruction manual prior to WARNING unpacking parts and pieces. - The setup instructions are created specifically for this configuration. - Setup instructions are laid out sequentially in steps, including exploded views with detailed explanation for assembly. - Page 4 © 2023 Order #XXXXX ECO Panel Installation ECO Panel Install Place ECO panel together with a vertical offset, slide down to lock connector in place. Panel Corner Connectors are installed just like ECO panels. Remove by off-setting top lock clips horizontally followed by separating vertically.
- Page 5 © 2023 Order #XXXXX SEG Installation Graphic Removal Corner A Corner B Corner D Corner C Step 1 Step 2 Step 3 It is important to first insert To remove the graphic from Insert corner A. Turn edge of Repeat Step 1 for opposite Once all corners are inserted, graphic into each alternate the frame, locate the fabric...
- Page 6 © 2023 Order #XXXXX Crate Packing CRATE PACKING Crate 1 of 1...
- Page 7 © 2023 Order #XXXXX TSP Frames Assembly Item Qty. Description Steps: 88”h TSP46 Vertical Extrusion 1) Assemble verticals [1,2] between horizontals [3,4]. 88”h TSP46 Vertical Extrusion TSP46 Corner Connection detail. 50”w TSP46 Horizontal Extrusion 2) Assemble verticals [5,6] between horizontals [7,8]. 50”w TSP46 Horizontal Extrusion w/ Velcro TSP46 Corner Connection detail.
- Page 8 © 2023 Order #XXXXX Backwall Assembly Item Qty. Description Steps: 8” x 22” oval Base Plate 1) Attach Base Plates [1] to bottom of verticals [2,3,4,5,6,7], using bolts. 96”h RSG540 Vertical Extrusion 2) Connect lower horizontals [8,10,12] between verticals [2,3], [4,5], [6,7] as shown. 96”h RSG540 Vertical Extrusion 3) Slide infills...
- Page 9 © 2023 Order #XXXXX Backwall Assembly (cont’d) Custom Cam Lock Connection Steps: 1) Connect frame assemblies together as shown, using custom cam locks. Top View Custom Cam Lock Connection detail. 2) Apply SEG Graphics to front of TSP frames, as shown. Cam Lock Refer to the SEG Installation general information page.
- Page 10 © 2023 Order #XXXXX Backwall Attachments Item Qty. Description Steps: 14A,14B 12,12 8”w Z32 Horizontal Extrusion 1) Attach shelves to verticals [2,3], [4,5], [6,7] as shown. 38.832”w x 10”d Shelf Shelf Attachment detail. Shelf Attachment Insert locks into groove of vertical extrusion & tighten setscrews.
- Page 11 © 2023 Order #XXXXX Backwall Attachments (cont’d) Steps: Wing Attachment Light Attachment 1) Connect wings to verticals [2,7] as shown. Wing Attachment detail. 1) Slide A10 connector Lock Clip into Groove of 2) Attach Lights to top of horizontals [4,8]. into groove of extrusion.
- Page 12 © 2023 Order #XXXXX ECO-8C Podium Assembly Steps: Panel Description 1) Assemble the panels in numerical order as shown below. 42” 90° Connector 2) Attach the EcoGlass sign with stand-off barrels and screw caps. 6” x 42” Panel 4) Place counter tops on assembled pedestals. 42”...
Need help?
Do you have a question about the eco systems ECO-2041 and is the answer not in the manual?
Questions and answers