CDA SC020 Use And Maintenance page 19

3. Slide the inner glass out noting the position of any rubber spacers
(fig. D).
4. Clean the panel with warm water with some cleaning agent added.
Carry out the same in reverse order to reassemble the inner glass
panel. Its smooth surface shall be pointed upwards.
Important! Do not force the upper strip in on both sides of the door at
the same time. In order to correctly fit the top door strip, first put the
left end of the strip on the door and then press the right end in until
you hear a "click". Then press the left end in until you hear a "click".
D1
1
2
2
1
Removal of the internal glass panel
Instruction Manual | 19