Scandomestic SKB10255W User Manual page 49

Installation measurement Meiling
Installation
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air.
Do not locate the refrigerator near a heat source such as cooker, and avoid it from direct sunlight, thus
guaranteeing the refrigeration effect while saving energy consumption. Do not locate the refrigerator
in the damp place, so as to prevent the refrigerator from rusting and leaking electricity. The result of
the total space of the room in which the refrigerator is installed being divided by the refrigerant
charge amount of the refrigerator shall not be less than 8 g/ M3.
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least 30mm of free space
above the product.
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will give rise to
vibration and noise. When the refrigerator is placed on such flooring materials as carpet, straw mat,
polyvinyl chloride, the solid backing plates should be applied underneath the refrigerator, so as to
prevent color change due to heat dissipation.
Heat dissipation area
When in operation, the product emits heat to the surroundings. Therefore, it is important to have
sufficient ventilation, so that the product can get rid of excess heat.
If the product is built into a cabinet, the product needs ventilation. The more air that circulates around
the product in the cabinet, the better it can get rid of the heat.
We recommend that there should be at least 30 mm of free space above and behind the product.
English 21