Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 20

• Speed change gear module
Name Parts
Speed change
gear
• Output axis module
Name Parts
Output axis
■Cam data
Name Function description
Cam data • It controls the operation pattern of the output axis (two-way
operation and feed operation), which is corresponding to the
input movement amount of the output axis module.
1 OUTLINE OF ADVANCED SYNCHRONOUS CONTROL
18
1.1 Outline of Synchronous Control
Function description
• It is used to change the speed by setting speed
change ratio during the operation.
Function description
• The cam conversion is processed based on the
input movement amount and the setting cam
data, so that the command position value is
output as the command to the servo amplifier.
Maximum number of usable
Number per module
4-axis module 8-axis module
4 8
Maximum number of usable
Number per module
4-axis module 8-axis module
4 8
Maximum number of usable
Number per module
Up to 256
Reference
Number
per axis
1 Page 125 Speed
Change Gear
Module
Reference
Number
per axis
1 Page 127 Output
Axis Module
Reference
Page 81 CAM FUNCTION