Safety Precautions; Battery Warning - Neousys Technology SEMIL-1300GC Series User Manual

Safety Precautions

⚫
Read these instructions carefully before you install, operate, or transport the
system.
⚫
Install the system or DIN rail associated with, at a sturdy location
⚫
Install the power socket outlet near the system where it is easily accessible
⚫
Secure each system module(s) using its retaining screws
⚫
Place power cords and other connection cables away from foot traffic. Do not
place items over power cords and make sure they do not rest against data
cables
⚫
Shutdown, disconnect all cables from the system and ground yourself before
touching internal modules
⚫
Ensure that the correct power range is being used before powering the device
⚫
Should a module fail, arrange for a replacement as soon as possible to
minimize down-time
⚫
If the system is not going to be used for a long time, disconnect it from mains
(power socket) to avoid transient over-voltage

Battery Warning

⚫
Batteries are at risk of exploding if incorrectly installed
⚫
Do not attempt to recharge, force open, or heat the
battery
⚫
Replace the battery only with the same or equivalent type
recommended by the manufacturer
Safety Precautions