HIKVISION KD94X3 User Manual
HIKVISION KD94X3 User Manual

HIKVISION KD94X3 User Manual

Face recognition door station with 8-inch screen
Table of Contents

Advertisement

Quick Links

Face Recognition Door Station with
8-inch Screen
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KD94X3 and is the answer not in the manual?

Questions and answers

Summary of Contents for HIKVISION KD94X3

  • Page 1 Face Recognition Door Station with 8-inch Screen User Manual...
  • Page 2 Face Recognition Door Station with 8-inch Screen User Manual Legal Information About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
  • Page 3 Face Recognition Door Station with 8-inch Screen User Manual OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
  • Page 4 Face Recognition Door Station with 8-inch Screen User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or Danger could result in death or serious injury. Indicates a potentially hazardous situation which, if not Caution avoided, could result in equipment damage, data loss,...
  • Page 5 Face Recognition Door Station with 8-inch Screen User Manual Safety Instruction Warning • All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. • Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value.
  • Page 6 Face Recognition Door Station with 8-inch Screen User Manual • Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or leakage of flammable liquid or gas. • Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.
  • Page 7 Face Recognition Door Station with 8-inch Screen User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 8 Face Recognition Door Station with 8-inch Screen User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/ 65/EU 2012/19/EU (WEEE directive): Products marked with this symbol...
  • Page 9 Face Recognition Door Station with 8-inch Screen User Manual l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
  • Page 10: Table Of Contents

    Face Recognition Door Station with 8-inch Screen User Manual Contents 1 Appearance ....................1 1.1 Door Station ...................... 1 1.2 Door Station with Keypad Module ..............2 1.3 Door Station with Fingerprint Module .............. 3 1.4 Door Station with 4G Module ................4 2 Terminal and Wiring Description ..............
  • Page 11 Face Recognition Door Station with 8-inch Screen User Manual 3.4.3 Flush Mounting ..................22 4 Activation ....................24 4.1 Activate Device Locally ..................24 4.2 Activate Device via Web .................. 24 4.3 Activate Device via Client Software ..............25 4.4 Activate Device via Batch Configuration Tool ..........25 5 Door Station Local Operation ..............
  • Page 12 Face Recognition Door Station with 8-inch Screen User Manual 6.4 Device Management ..................33 6.5 Parameters Settings ..................33 6.5.1 Local Settings ..................34 6.5.2 System Configuration ................35 6.5.3 Network Settings ..................38 6.5.4 Video & Audio Settings ................43 6.5.5 Image Settings ..................
  • Page 13 Face Recognition Door Station with 8-inch Screen User Manual 7.6.1 Add Organization ..................61 7.6.2 Modify and Delete Organization ............. 61 7.7 Person Management ..................61 7.7.1 Add Person ..................... 62 7.7.2 Modify and Delete Person ..............63 7.7.3 Import and Export Person Information ..........63 7.7.4 Get Person Information ................
  • Page 14: Appearance

    Face Recognition Door Station with 8-inch Screen User Manual 1 Appearance 1.1 Door Station Note Refers to the specific model for the appearance of the device. Figure 1-1 Door Station Table 1-1 Appearance Description Description Description Wiring Terminal TAMPER Network Interface Loudspeaker IR Supplement Light Debugging Port...
  • Page 15: Door Station With Keypad Module

    Face Recognition Door Station with 8-inch Screen User Manual Description Description Camera SD Card Slot CMOS 1.2 Door Station with Keypad Module Note Refers to the specific model for the appearance of the device. Figure 1-2 Door Station with Keypad Module Table 1-2 Appearance Description Description Description...
  • Page 16: Door Station With Fingerprint Module

    Face Recognition Door Station with 8-inch Screen User Manual Description Description Microphone Debugging Port Note The debugging port is used for debugging only. Camera MicroUSB Interface CMOS SD Card Slot 1.3 Door Station with Fingerprint Module Note Refers to the specific model for the appearance of the device. Figure 1-3 Door Station with Fingerprint Module...
  • Page 17: Door Station With 4G Module

    Face Recognition Door Station with 8-inch Screen User Manual Table 1-3 Appearance Description Description Description Wiring Terminal Fingerprint Module Network Interface TAMPER IR Supplement Light Loudspeaker Microphone Debugging Port Note The debugging port is used for debugging only. Camera MicroUSB Interface CMOS SD Card Slot Button...
  • Page 18 Face Recognition Door Station with 8-inch Screen User Manual Figure 1-4 Door Station with 4G Module Table 1-4 Appearance Description Description Description Wiring Terminal TAMPER Network Interface Loudspeaker IR Supplement Light Debugging Port Note The debugging port is used for debugging only. Microphone MicroUSB Interface Camera...
  • Page 19: Terminal And Wiring Description

    Face Recognition Door Station with 8-inch Screen User Manual 2 Terminal and Wiring Description Door station can be wired to alarm input interface, alarm input interface, door lock, door contact and so on. Figure 2-1 Terminal and Wiring Description...
  • Page 20: Installation

    Face Recognition Door Station with 8-inch Screen User Manual 3 Installation 3.1 Install Door Station Note • Gang box is required for the installation of door station. • The power supply the door station supports is 12 VDC. Please make sure your power supply matches your door station.
  • Page 21 Face Recognition Door Station with 8-inch Screen User Manual Mounting Plate Figure 3-1 Mounting Plate Note The dimension of the mounting plate is 233 mm (W) × 112.4 mm (H) × 21 mm (D).
  • Page 22: Surface Mounting

    Face Recognition Door Station with 8-inch Screen User Manual Gang Box Figure 3-2 Gang Box Note • The dimension of the gang box is 236.9 mm (W) × 128.4 mm (H) × 40.8 mm (D). • The installation hole should be bigger than the actual size. The suggested dimension of the installation hole is 237.5 mm (W) ×...
  • Page 23: Flush Mounting

    Face Recognition Door Station with 8-inch Screen User Manual Note • Do not touch the SD card slot and other devices during the process of plugging in and unplugging the power interface. • Apply Silicone sealant among the joints between the device and the wall (except the lower side) to keep the raindrop from entering.
  • Page 24: Install Door Station With Keypad Module

    Face Recognition Door Station with 8-inch Screen User Manual Figure 3-4 Flush Mounting 3.2 Install Door Station with Keypad Module Note • Gang box is required for the installation of door station. • The power supply the door station supports is 12 VDC. Please make sure your power supply matches your door station.
  • Page 25 Face Recognition Door Station with 8-inch Screen User Manual Mounting Plate Figure 3-5 Mounting Plate Note The dimension of the mounting plate is 233 mm (W) × 112.4 mm (H) × 21 mm (D).
  • Page 26: Surface Mounting

    Face Recognition Door Station with 8-inch Screen User Manual Gang Box Figure 3-6 Gang Box Note • The dimension of the gang box is 312.9 mm (W) × 128.4 mm (H) × 40.8 mm (D). • The installation hole should be bigger than the actual size. The suggested dimension of the installation hole is 313.5 mm (W) ×...
  • Page 27: Flush Mounting

    Face Recognition Door Station with 8-inch Screen User Manual Steps 1. Loosen splice set screws, and separate the host from the keypad module. Paste the mounting template on the wall according to the installation location requirements. Drill holes according to the location of the screw holes of the drill template, and install the expansion bolts into the screw holes.
  • Page 28: Install Door Station With Fingerprint Module

    Face Recognition Door Station with 8-inch Screen User Manual 2. Take out the gang box. Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into the screw holes. Fix the gang box with 4 expansion bolts.
  • Page 29 Face Recognition Door Station with 8-inch Screen User Manual Mounting Plate Figure 3-9 Mounting Plate Note The dimension of the mounting plate is 233 mm (W) × 112.4 mm (H) × 21 mm (D).
  • Page 30: Surface Mounting

    Face Recognition Door Station with 8-inch Screen User Manual Gang Box Figure 3-10 Gang Box Note • The dimension of the gang box is 312.9 mm (W) × 128.4 mm (H) × 40.8 mm (D). • The installation hole should be bigger than the actual size. The suggested dimension of the installation hole is 313.5 mm (W) ×...
  • Page 31: Flush Mounting

    Face Recognition Door Station with 8-inch Screen User Manual Steps 1. Loosen splice set screws, and separate the host from the fingerprint module. Paste the mounting template on the wall according to the installation location requirements. Drill holes according to the location of the screw holes of the mounting template, and install the expansion bolts into the screw holes.
  • Page 32: Door Station With 4G Module Installation Accessories

    Face Recognition Door Station with 8-inch Screen User Manual the wall, insert the gang box into the installation hole, and mark the gang box screw holes’ position with a marker. 2. Take out the gang box. Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into the screw holes.
  • Page 33: Door Station With 4G Module Installation Accessories

    Face Recognition Door Station with 8-inch Screen User Manual • Make sure all the related equipment is power-off during the installation. • Installation Location: the lens of the device shall be 1.5 meters away from the ground. 3.4.1 Door Station with 4G Module Installation Accessories Mounting Plate Figure 3-13 Mounting Plate Note...
  • Page 34: Surface Mounting

    Face Recognition Door Station with 8-inch Screen User Manual Gang Box Figure 3-14 Gang Box Note • The dimension of the gang box is 312.9 mm (W) × 128.4 mm (H) × 40.8 mm (D). • The installation hole should be bigger than the actual size. The suggested dimension of the installation hole is 313.5 mm (W) ×...
  • Page 35: Flush Mounting

    Face Recognition Door Station with 8-inch Screen User Manual Steps 1. Loosen splice set screws, and separate the host from the 4G module. Paste the drill template on the wall according to the installation location requirements. Drill holes according to the location of the screw holes of the drill template, and install the expansion bolts into the screw holes.
  • Page 36 Face Recognition Door Station with 8-inch Screen User Manual the wall, insert the gang box into the installation hole, and mark the gang box screw holes’ position with a marker. 2. Take out the gang box. Drill 4 holes according to the marks on the wall, and insert the expansion sleeves into the screw holes.
  • Page 37: Activation

    Face Recognition Door Station with 8-inch Screen User Manual 4 Activation You can activate the device via Guarding Vision or Batch Configuration Tool. Default parameters of door station are as follows: • Default IP Address: 192.0.0.65. • Default Port No.: 8000. •...
  • Page 38: Activate Device Via Client Software

    Face Recognition Door Station with 8-inch Screen User Manual Network → TCP/IP to edit the door station IP address, subnet mask, gateway and other parameters. 4.3 Activate Device via Client Software Steps 1. On the device management page, select Encoding Device/Door Station, and select the device to be activated in the online device area.
  • Page 39: Door Station Local Operation

    Face Recognition Door Station with 8-inch Screen User Manual 5 Door Station Local Operation 5.1 Door Station Local Configuration Hold the menu page, enter the password and tap OK to enter the configuration page. 5.1.1 Edit Network Parameters After activating, you should edit the network parameters. Set the IP address of the door station and the IP address of the door station associated device, to realize the network communication between the devices.
  • Page 40: User Management

    Face Recognition Door Station with 8-inch Screen User Manual Note After the channel mode is enabled, the residents can directly pass through without verification. 6. After the door station settings are completed, exit the settings page to complete the configuration. Note •...
  • Page 41: Search Version

    Face Recognition Door Station with 8-inch Screen User Manual 3) Tap OK to enable the settings. 6. Add Face. 1) Select Face, and point the face at the camera. 2) Tap to add the face. 3) Tap to enable the settings. 7.
  • Page 42: Call Center

    Face Recognition Door Station with 8-inch Screen User Manual Note • Both the main and sub door station support the elevator control function, that is, after calling the residents successfully, tap the unlock button on the indoor station, the elevator will automatically arrive at the floor where the door station is located, and the permission of the floor where the household is located will be opened (The elevator calling will take effect only after the elevator control is configured and the...
  • Page 43: Unlock Door

    Face Recognition Door Station with 8-inch Screen User Manual 5.3 Unlock Door You can unlock door station in following methods: Unlock by password, unlock by presenting card, unlock by face, and unlock by fingerprint. 5.3.1 Unlock by Password Unlock by Password On the menu page, Tap to enter the calling page.
  • Page 44: Unlock By Qr Code

    Face Recognition Door Station with 8-inch Screen User Manual 5.3.4 Unlock by QR Code Door station supports unlock by QR code. You can generate a QR code through the mobile phone client, and use the door station camera to scan the mobile phone QR code to open the door.
  • Page 45: Remote Configuration Via Web

    Face Recognition Door Station with 8-inch Screen User Manual 6 Remote Configuration via Web 6.1 Live View In the browser address bar, enter the IP address of the device, and press the Enter key to enter the login page. Enter the user name and password, and click Login to enter the Live View page. •...
  • Page 46: Device Management

    Face Recognition Door Station with 8-inch Screen User Manual 6.4 Device Management You can manage the linked device on the page. Add Linked Device Click Add to add the indoor station or sub door station. Enter the parameters and click OK to add the device. Click Import.
  • Page 47: Local Settings

    Face Recognition Door Station with 8-inch Screen User Manual Note Run the IE browser, and click → Internet Options → Security to disable the Protected Mode. Click Settings to enter the settings page. 6.5.1 Local Settings Video Parameters: • Stream Type: Select the stream type toMain StreamorSub Stream. •...
  • Page 48: System Configuration

    Face Recognition Door Station with 8-inch Screen User Manual 6.5.2 System Configuration In system configuration, you can view device information, set system time, configure maintenance settings, and configure user information, etc. Click System to enter the settings page. Basic Information Click System Settings →...
  • Page 49 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-2 System Maintenance • Reboot:Click Reboot to reboot the device. • Restore: Click Restore to restore parameters to default settings. Restore Reset all the parameters, except IP address, subnet mask and default gateway, to the default settings.
  • Page 50 Face Recognition Door Station with 8-inch Screen User Manual Note Do not power off during the upgrading. The device will reboot automatically after upgrading. Security Service SSH is generally used for remote debugging. For device security, it is recommended not to enable SSH when the service is not needed. Click Security →...
  • Page 51: Network Settings

    Face Recognition Door Station with 8-inch Screen User Manual characters, lowercase letters and uppercase letters, it is a medium password. If the password is a combination of numbers and lowercase letters, or a combination of numbers and uppercase letters, it is a weak password. Online User Click User Management →...
  • Page 52 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-3 TCP/IP Settings 2. Configure the network parameters. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway, Preferred DNS Server and Alternate Server. Check DHCP, the device will get the parameters automatically. 3.
  • Page 53 Face Recognition Door Station with 8-inch Screen User Manual Steps 1. Click Settings → Network → Basic Settings → Port to enter the settings page. 2. The port No. needs to be changed when there are port conflicts. Figure 6-4 Port Configuration HTTP Port When you log in with a browser, you need to add the modified port number after the address.
  • Page 54 Face Recognition Door Station with 8-inch Screen User Manual terminals on the same network segment. After successfully registering with the SIP server, the terminals can dial the SIP ID to complete the call. Steps 1. Click Network → Basic Settings → SIP to enter the settings page. Figure 6-5 SIP Settings 2.
  • Page 55 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-6 FTP Settings 2. Check Enable FTP, and select Server Type, enter Server IP Address, Port, User Name and Password. 3. Optional: Check Enable Anonymous, you do not need to configure the user name and password.
  • Page 56: Video & Audio Settings

    Face Recognition Door Station with 8-inch Screen User Manual Platform Access Settings Platform access provides you an option to manage the devices via platform. Steps 1. Click Configuration → Network → Advanced Settings → Platform Access to enter the settings page. 2.
  • Page 57 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-7 Video Parameters 2. Configure the video parameters. Stream Type Set the video parameters of main stream and sub-stream. Video Type Select the stream type as video stream, or video & audio composite stream. The video &...
  • Page 58: Image Settings

    Face Recognition Door Station with 8-inch Screen User Manual The device supports H.264. Please refer to the specific model for the video encoding type. I Frame Interval The number of frames between two key frames before and after. You can set I Frame Interval from 1 to 400.
  • Page 59 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-9 Display Settings 2. Select the Format. 3. Optional: Enable WDR. 4. Set the display parameters. Adjust the brightness, contrast, saturation, and sharpness of the preview screen by dragging the progress bar. Adjust the screen by entering the corresponding value in the input box.
  • Page 60: Event Settings

    Face Recognition Door Station with 8-inch Screen User Manual 3) Adjust Supplement Light Brightness by dragging the progress bar. 4) Set the Daytime Start Time and Daytime End Time. 7. Exit the settings page. 6.5.6 Event Settings When an event occurs, an alarm linkage will be triggered. Motion Detection Settings Motion detection detects the moving objects in the configured surveillance area, and a series of actions can be taken when the alarm is triggered.
  • Page 61 Face Recognition Door Station with 8-inch Screen User Manual 2. Slide Enable Motion Detection to enable the function. Note If the motion detection function is disabled, you cannot draw the detection area and adjust the sensitivity. 3. Click Draw Area. Click and drag the mouse on the window to draw a motion detection area.
  • Page 62 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-11 Event Linkage 2. Configure the major types of events, the major types of access control events are divided into Device Event and Door Event. 3. Configure minor types of events. When the major type of access control event is selected as Device Event, the minor type is Host Tamper Alarm.
  • Page 63: Two-Way Audio Configuration

    Face Recognition Door Station with 8-inch Screen User Manual 6.5.7 Two-way Audio Configuration Device No. Settings Identify the organization the device belongs to and the device No. Steps 1. Click Settings → Intercom → Device No. to enter the settings page. Figure 6-12 Device No.
  • Page 64 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-13 Session Settings 2. Set activation password, main station IP, intercom serve and enable 1.0 protocol. Register Number Register Number of the device, created by default. Registration Password Activation password of the main station. Main Station IP IP address of the main station.
  • Page 65: Access Control Settings

    Face Recognition Door Station with 8-inch Screen User Manual Figure 6-14 Time Parameter You can drag the slider to configure Max. Call Duration and Max. Message Duration, and click Save to enable the settings. Note • The Max. call duration ranges from 90 s to 120 s. •...
  • Page 66 Face Recognition Door Station with 8-inch Screen User Manual Caution In order to prevent security risks, you must modify the initial password in time after the initial login to prevent others from logging in to your device without authorization or causing other undesirable consequences. 4.
  • Page 67 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-16 Elevator Control 2. Check Enable Elevator Control. 3. Select an Elevator No., Elevator Controller Type and Interface Type. Note • Only main door station supports elevator control. • If you select Network Interface, enter the elevator controller's IP address, port No., user name, and password.
  • Page 68: Smart Settings

    Face Recognition Door Station with 8-inch Screen User Manual Note No. 1 can be set to work mode as ladder control, card reader or disabled. 4. Click Save to enable the settings. 6.5.9 Smart Settings Biometrics Settings Steps 1. Click Configuration → Smart → Biometrics Settings to enter the settings page. Figure 6-18 Biometrics Settings 2.
  • Page 69: Theme Settings

    Face Recognition Door Station with 8-inch Screen User Manual Figure 6-19 Area Configuration 2. Drag the frame to adjust the size of the recognition area. 3. Click Save. Optional: Click in Live View to record or capture. 6.5.10 Theme Settings Set the advertisement on the main page of the device.
  • Page 70 Face Recognition Door Station with 8-inch Screen User Manual Figure 6-20 Theme Settings 2. Set the advertisement theme. 1) Click + Add Theme. 2) Create a theme name, and select the advertisement body as picture or Video. 3) Click Save. 3.
  • Page 71: Remote Configuration Via Client Software

    Face Recognition Door Station with 8-inch Screen User Manual 7 Remote Configuration via Client Software You can set Video Intercom system and manage video intercom products including indoor station, door station and main station via Guarding Vision client software. 7.1 Edit Device Network Parameters Before You Start Before configuring the device remotely, make sure that the device is activated.
  • Page 72: Add Device Via Ip Address

    Face Recognition Door Station with 8-inch Screen User Manual 4. Enter the device Name, User Name, Password, and click Add. Note • Only when the doorphone is added to the client software, you can remotely configure the indoor station. • Only online devices with the same user name and activation password can support batch activation.
  • Page 73: Add Device Via Ehome

    Face Recognition Door Station with 8-inch Screen User Manual 4. Select the file and click Add to import. Note The file format for batch import is .csv format. 7.2.5 Add Device Via EHome Steps 1. In the device list area, click Add to pop up the device adding dialog box. 2.
  • Page 74: Live View

    Face Recognition Door Station with 8-inch Screen User Manual You can add device, modify device, delete device, perform remote configuration, etc. in device management page. The specific method is similar to web configuration . For details, please refer to the Guarding Vision client user manual. Note •...
  • Page 75: Add Person

    Face Recognition Door Station with 8-inch Screen User Manual You can add, edit, import, and export person information. 7.7.1 Add Person Steps 1. On the main page of the client, click Person Management to enter the person information configuration page. 2.
  • Page 76: Modify And Delete Person

    Face Recognition Door Station with 8-inch Screen User Manual 1) Click Credential → Fingerprint. 2) Select Collection Mode and Collection Recorder. 3) Click Start to Scan to add the fingerprint. 4) Click Add to save the fingerprint. Note Only some models of the devices support fingerprint function, please refer to the specific product.
  • Page 77: Get Person Information

    Face Recognition Door Station with 8-inch Screen User Manual 4. Click Close to complete the import. Note • Click Download Template for Importing Person to download the template. • The import template contains the following information: person name, gender, department code, certificate type, certificate number, phone number and address.
  • Page 78: Permission Settings

    Face Recognition Door Station with 8-inch Screen User Manual Steps 1. On the person management page, click Batch Issue Cards. 2. Click Settings to set issue card paramrters. If you set issue card Mode as Local, you need to set Card Issuer, Card Type and Card No., and enable Buzzer and M1 Card Encryption and click OK to issue card.
  • Page 79: Video Intercom

    Face Recognition Door Station with 8-inch Screen User Manual 7.8.1 Video Intercom You can call residents on the video intercom page, and the residents can also call the client software through the indoor station. The door station can also call the client software.
  • Page 80: Search Video Intercom Information

    Face Recognition Door Station with 8-inch Screen User Manual Note • One video intercom device can only connect with one client software. • The maximum ring duration can be set from 15 s to 60 s. • The maximum speaking duration between the client software and indoor station can be set from 120 s to 600 s.
  • Page 81: Upload Arming Information

    Face Recognition Door Station with 8-inch Screen User Manual Information Type You can set the information type as all, advertising Information, property information, alarm information or notice information according to your needs. Time Set the start time and end time of a time period to search the logs. 3.
  • Page 82 Face Recognition Door Station with 8-inch Screen User Manual 3. Optional: Click Arm All or Disarm All to arm or disarm devices.
  • Page 83: Batch Configuration Tool

    Face Recognition Door Station with 8-inch Screen User Manual 8 Batch Configuration Tool You can only configure and operate the door station after creating a password for the device activation. Default parameters of door station are as follows: • Default IP Address: 192.0.0.65. •...
  • Page 84 Face Recognition Door Station with 8-inch Screen User Manual Link Main Door Station Steps 1. Select the community structure. Here takes building 1 (with 1 unit, 1 floor, 2 rooms) as an example. Figure 8-1 Link Main Door Station 2. Set the starting IP address of main door station (The default starting IP is paired with the unit 1 sub door station).
  • Page 85 Face Recognition Door Station with 8-inch Screen User Manual Caution • During the rooting process, if the door station has been activated locally on the device or the configuration tool, the login password entered here is the activation password. • During the rooting process, if the door station is not activated, then entering the login password here is to set a password by yourself.
  • Page 86: Upgrade In Batch

    Face Recognition Door Station with 8-inch Screen User Manual 4. Set the corresponding network information. Set the main door station IP address, SIP server IP address, main station IP address, central platform IP address and port No. Set the subnet mask and gateway address. 5.
  • Page 87 Face Recognition Door Station with 8-inch Screen User Manual You can add online devices to be upgraded in the same network segment, or add devices to be upgraded by IP address or IP segment. Add Online Device for Upgrading Steps 1.
  • Page 88: Upgrade Device

    Face Recognition Door Station with 8-inch Screen User Manual 2. Search and add devices. Search via IP Enter the device IP address and search for the device to be added. Search via IP Segment Enter the device IP segment and search for the device to be added. 3.
  • Page 89 Face Recognition Door Station with 8-inch Screen User Manual Figure 8-5 Upgrade by File 2. Select the upgrade file, click Open and Start to Upgrade, and the device starts to upgrade. Note Device will reboot automatically after upgrading.
  • Page 90 UD23399N...

Table of Contents