1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Intercom System
  5. ADS-24S-12 1224GPCN
  6. Quick start manual

HIKVISION ADS-24S-12 1224GPCN Quick Start Manual

Video intercom main unit
Hide thumbs Also See for ADS-24S-12 1224GPCN:
Table of Contents

Advertisement

Quick Links

Video Intercom Main Unit
Quick Start Guide
Scan to get detailed User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION ADS-24S-12 1224GPCN

Summary of Contents for HIKVISION ADS-24S-12 1224GPCN

  • Page 1 Video Intercom Main Unit Quick Start Guide Scan to get detailed User Manual...
  • Page 2 Trademarks and other Hikvision marks are the property of Hikvision and are registered trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other trademarks mentioned in this manual are the properties of their respective owners. No right of license is given to use such trademarks without express permission.
  • Page 3 Video Intercom Main Unit·Quick Start Guide Support Should you have any questions, please do not hesitate to contact your local dealer.
  • Page 4 Video Intercom Main Unit·Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 Video Intercom Main Unit·Quick Start Guide 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
  • Page 6  The power supply must conform to LPS. The recommended adaptor models and manufacturers are shown as below. Use the attached adaptor, and do not change the adaptor randomly. Model Manufacturer Standard Shenzhen Honor Electronic ADS-24S-12 1224GPCN Co., Ltd. Channel Well Technology KPL-060F-VI Co., Ltd.
  • Page 7 Video Intercom Main Unit·Quick Start Guide Cautions  Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). ...

  • Page 8: Table Of Contents

    Video Intercom Main Unit·Quick Start Guide Table of Contents 1 Appearance ....................1 2 Terminal and Wiring ..................2 2.1 Terminal Description ....................2 2.2 Wiring Description ....................3 2.2.1 Door Lock Wiring ....................3 2.2.2 Door Magnetic Wiring ..................4 2.2.3 Exit Button Wiring .....................

  • Page 9: Appearance

    Video Intercom Main Unit·Quick Start Guide 1 Appearance Figure 1-1 Main Unit Appearance Table 1-1 Appearance Description Description Microphone Low Illumination IR Supplement Light Built-in Camera Loudspeaker Call Button Nametag TAMPER Network Interface Module-connecting Interface(output) Terminals  Nametag area supports insert customized name card. The suggested card size is: 58 (L) x 11.7(W) mm.

  • Page 10: Terminal And Wiring

    Video Intercom Main Unit·Quick Start Guide 2 Terminal and Wiring 2.1 Terminal Description Figure 2-1 Terminals and Interfaces Table 2-1 Descriptions of Terminals and Interfaces Interface Description Door Lock Relay Output (NC) Door Lock Relay Output (NO) Common Interface Door Lock Relay Output (NC) Door Lock Relay Output (NO) Grounding 12V DC...

  • Page 11: Wiring Description

    Video Intercom Main Unit·Quick Start Guide Interface Description 12V OUT PoE Network Interface(Supports IEEE 802.3af/at-Compliant Devices) 2.2 Wiring Description 2.2.1 Door Lock Wiring Figure 2-2 Door Lock Wiring  Terminal NC1/COM is set as default for accessing magnetic lock/electric bolt; terminal NO2/COM is set as default for accessing electric strike.

  • Page 12: Door Magnetic Wiring

    Video Intercom Main Unit·Quick Start Guide 2.2.2 Door Magnetic Wiring Figure 2-3 Door Magnetic Wiring AIN1 and AIN2 are defaulted to connect door magnetic. Door magnetic connected to AIN1 detects status of the lock that connected to NC1/NO1; Door magnetic connected to AIN2 detects the status of the lock connected to NC2/NO2.
  • Page 13 Video Intercom Main Unit·Quick Start Guide AIN3 and AIN4 are set as default for connecting exit button. Exit button connected to AIN3 opens the lock connected to NC1/NO1; Exit button connected to AIN4 controls the lock that connected to NC2/NO2.

  • Page 14: Installation

    Video Intercom Main Unit·Quick Start Guide 3 Installation Before you start:  Make sure the device in the package is in good condition and all the assembly parts are included.  Sub module must work along with the main unit. ...

  • Page 15: One-Module Installation

    Video Intercom Main Unit·Quick Start Guide Figure 3-1 DIP Switch 2. Set the sub module address according to the DIP rules, and install the rubber cover back.  Digit 1, 2, 3, 4 are used to coding the sub module address; Digit 5, 6, 7 are reserved; Digit 8 is a resistance (120Ω) is you set it as on.
  • Page 16 Video Intercom Main Unit·Quick Start Guide Figure 3-2 Front and Side View  The dimension of one module mounting frame is: 117(L)×107(W)×32.7(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1.
  • Page 17 Video Intercom Main Unit·Quick Start Guide Figure 3-3 Chisel Screw Hole 3. Remove the sticker and insert the expansion sleeves into the screw holes. 4. Fix the mounting frame onto the wall with 4 expansion bolts.
  • Page 18 Video Intercom Main Unit·Quick Start Guide Figure 3-4 Fix the Mounting Frame  The mounting frame should be placed exactly as below for this step. The tamper plate should be at the low-right. 5. Connect the cables to the corresponding interfaces of the main unit and insert it into the frame.

  • Page 19: One-Module Flush Mounting

    Video Intercom Main Unit·Quick Start Guide Figure 3-5 Insert the Main unit 6. Use the hexagon wrench in the package fix the cover onto the frame. Figure 3-6 Fix the Cover 3.2.2 One-Module Flush Mounting Gang Box...
  • Page 20 Video Intercom Main Unit·Quick Start Guide Figure 3-7 Front and Side View Figure 3-8 Appearance Description...
  • Page 21 Video Intercom Main Unit·Quick Start Guide  The dimension of one-module gang box is: 115(L)×134(W)×56(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1. Cave the installation hole, and pull the cable out. The suggested dimension of installation hole is 118(L)×108(W)×45.5(D) mm.
  • Page 22 Video Intercom Main Unit·Quick Start Guide Figure 3-11 Fix the Gang Box 6. Fill and level up the gap between the gang box and wall with concrete. Remove the 4 mounting ears with tool after concrete is dry. Figure 3-12 Remove the Mounting Ears 7.

  • Page 23: Two-Module Installation

    Video Intercom Main Unit·Quick Start Guide Figure 3-14 Fix the Cover 3.3 Two-Module Installation 3.3.1 Two-Module Surface Mounting Mounting Frame...
  • Page 24 Video Intercom Main Unit·Quick Start Guide Figure 3-15 Front and Side View  The dimension of two-module mounting frame is: 219(L)×107 (W)×32.7(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1.
  • Page 25 Video Intercom Main Unit·Quick Start Guide Figure 3-16 Chisel Screw Hole 3. Remove the sticker and insert the expansion sleeves into the screw holes. 4. Fix the mounting frame onto the wall with 4 expansion bolts. Figure 3-17 Fix the Mounting Frame The mounting frame should be placed exactly as below for this step.
  • Page 26 Video Intercom Main Unit·Quick Start Guide 5. Thread the module-connecting line across the thread hole of the frame. Pass the main unit connecting lines across the thread hole to the upper grid. Figure 3-18 Placement of Lines 6. Connect the cables and module-connecting line to the corresponding interfaces of the main unit, then place the main unit into the upper grid.
  • Page 27 Video Intercom Main Unit·Quick Start Guide Figure 3-19 Line Connection Effect Picture 7. Insert the modules in to the frame after wiring. Main unit must be placed in the top grid. Figure 3-20 Insert the Modules 8. Use the hexagon wrench in the package fix the cover onto the frame.

  • Page 28: Two-Module Flush Mounting

    Video Intercom Main Unit·Quick Start Guide Figure 3-21 Fix the Cover 3.3.2 Two-Module Flush Mounting Gang Box Figure 3-22 Front and Side View...
  • Page 29 Video Intercom Main Unit·Quick Start Guide Figure 3-23 Appearance Description  The dimension of one-module gang box is: 237(L)×134(W)×56(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1.
  • Page 30 Video Intercom Main Unit·Quick Start Guide Figure 3-24 Cave the Installation Hole 2. Remove the plastic sheet of the cable entry which will be used. 3. Insert the gang box into the hole and pull out the cables through the cable entry. Mark the screw holes’...
  • Page 31 Video Intercom Main Unit·Quick Start Guide Figure 3-26 Fix the Gang Box 6. Fill and level up the gap between the gang box and wall with concrete. Remove the mounting ears with tool after concrete is dry. Figure 3-27 Remove the Mounting Ears 7.
  • Page 32 Video Intercom Main Unit·Quick Start Guide Figure 3-28 Connect Wires and Insert Modules Cable 1 refers to the cables pulled out from the wall that connected to the main unit. Cable 2 refers to the module-connecting line in the accessory package. 8.

  • Page 33: Three-Module Installation

    Video Intercom Main Unit·Quick Start Guide 3.4 Three-Module Installation 3.4.1 Three-Module Surface Mounting Installation Frame Figure 3-30 Front and Side View  The dimension of two-module mounting frame is: 320.8(L)×107 (W)×32.7(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension.
  • Page 34 Video Intercom Main Unit·Quick Start Guide Figure 3-31 Chisel Screw Hole 3. Remove the sticker and insert the expansion sleeves into the screw holes. 4. Fix the mounting frame onto the wall with 4 expansion bolts. Figure 3-32 Fix the Mounting Frame The mounting frame should be placed exactly as below for this step.
  • Page 35 Video Intercom Main Unit·Quick Start Guide 5. Thread the module-connecting lines across the thread holes of the frame. Pass the main unit connecting lines across the thread hole to the top grid.
  • Page 36 Video Intercom Main Unit·Quick Start Guide Figure 3-33 Placement of Lines 6. Connect the cables and module-connecting line 1 to the corresponding interfaces of the main unit, then place the main unit into the upper grid. Connect the other end of the module-connecting line1 to the input interface of the sub module.
  • Page 37 Video Intercom Main Unit·Quick Start Guide Figure 3-34 Line Connection Effect Picture 7. Insert the modules in to the frame after wiring. Main unit must be placed in the top grid. Figure 3-35 Insert the Modules...

  • Page 38: Three-Module Flush Mounting

    Video Intercom Main Unit·Quick Start Guide 8. Use the hexagon wrench in the package fix the cover onto the frame. Figure 3-36 Fix the Cover 3.4.2 Three-Module Flush Mounting Gang Box...
  • Page 39 Video Intercom Main Unit·Quick Start Guide Figure 3-37 Front and Side View...
  • Page 40 Video Intercom Main Unit·Quick Start Guide Figure 3-38 Appearance Description  The dimension of one-module gang box is: 338.8(L)×134(W)×56(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. Steps: 1.
  • Page 41 Video Intercom Main Unit·Quick Start Guide Figure 3-39 Cave the Installation Hole 2. Remove the plastic sheet of the cable entry which will be used. 3. Insert the gang box into the hole and pull out the cables through the cable entry. Mark the screw holes’...
  • Page 42 Video Intercom Main Unit·Quick Start Guide Figure 3-41 Fix the Gang Box 6. Fill and level up the gap between the gang box and wall with concrete. Remove the mounting ears with tool after concrete is dry. Figure 3-42 Remove the Mounting Ears 7.
  • Page 43 Video Intercom Main Unit·Quick Start Guide Figure 3-43 Connect Wires and Insert Modules Cable 1 refers to the cables pulled out from the wall that connected to the main unit. Cable 2 and Cable 3 refer to the module-connecting line in the accessory package. 8.

  • Page 44: More-Than-Three Module Installation

    Video Intercom Main Unit·Quick Start Guide 3.5 More-than-Three Module Installation 3.5.1 More-than-Three Module Surface Mounting Figure 3-45 Front and Side View  It takes two three-module mounting frames. The dimension of three-module mounting frame is: 320.8(L)×107 (W)×32.7(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension.
  • Page 45 Video Intercom Main Unit·Quick Start Guide Figure 3-46 Chisel Screw Hole 4. Remove the stickers and insert the expansion sleeves into the screw holes. 5. Thread the module-connecting line (400 mm) and grounding line across the thread hole of both frames. Figure 3-47 Place the Grounding Line and Module-Connecting Line ...
  • Page 46 Video Intercom Main Unit·Quick Start Guide 6. Fix the mounting frame onto the wall with 8 expansion bolts. Figure 3-48 Fix the Mounting Frame The mounting frame should be placed exactly as below for this step. The tamper plate should be at the low right of the first grid. 7.
  • Page 47 Video Intercom Main Unit·Quick Start Guide Thread the module-connecting line (190 mm) across the thread hole of the frame. The lines should be placed as below: Figure 3-49 Placement of Lines 8. Connect the cables and module-connecting line 1 to the corresponding interfaces of the main unit, then place the main unit into the upper grid.
  • Page 48 Video Intercom Main Unit·Quick Start Guide Figure 3-50 Line Connection Effect Picture 9. Insert the modules in to the frame after wiring. Main unit must be placed in the top grid on the left.
  • Page 49 Video Intercom Main Unit·Quick Start Guide Figure 3-51 Insert the Modules 10. Pull the grounding line out and fixed its two end to the screw on the cover. Figure 3-52 Connect the Grounding Line to the Cover 11. Use the hexagon wrench in the package fix the cover onto the frame.

  • Page 50: More-Than-Three Module Flush Mounting

    Video Intercom Main Unit·Quick Start Guide Figure 3-53 Fix the Cover 3.5.2 More-than-Three Module Flush Mounting Gang Box...
  • Page 51 Video Intercom Main Unit·Quick Start Guide Figure 3-54 Front and Side View...
  • Page 52 Video Intercom Main Unit·Quick Start Guide Figure 3-55 Appearance Description  It takes two three-module gang boxes. The dimension of the gang box is: 338.8(L)× 134 (W)×56(D) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension.
  • Page 53 Video Intercom Main Unit·Quick Start Guide Figure 3-56 Cave the Installation Hole 2. Connect the two gang boxes as the below. Figure 3-57 Cave the Installation Hole 3. Remove the plastic sheet of the cable entry which will be used. 4.
  • Page 54 Video Intercom Main Unit·Quick Start Guide Figure 3-58 Remove the Plastic Sheets 5. Insert the gang boxes into the hole and pull out the cables through the cable entry. Mark the screw holes’ position with a marker, and take out the gang boxes. Figure 3-59 Mark the Screw Holes 6.
  • Page 55 Video Intercom Main Unit·Quick Start Guide Figure 3-60 Fix the Gang Boxes 8. Fill and level up the gap between the gang box and wall with concrete. Remove the mounting ears with tool after concrete is dry. Figure 3-61 Remove the Mounting Ears 9.
  • Page 56 Video Intercom Main Unit·Quick Start Guide Figure 3-62 Place the Grounding Line  The green-yellow line in the package is for grounding. 10. Connect wires and insert the modules. a. Connect Cable 1 and one end of Cable 2 to the corresponding interfaces of the Main Unit, then place the Main Unit into the upper grid of the left gang box.
  • Page 57 Video Intercom Main Unit·Quick Start Guide Figure 3-63 Install Mounting Frames The cables connect to each module shown as below: Figure 3-64 Install Mounting Frames  Cable 2,3,5 and 6 are the module-connecting lines (190 mm) in the package.
  • Page 58 Video Intercom Main Unit·Quick Start Guide  Cable 4 is the module-connecting line (400 mm) in the package.  Main unit must be put in the top grid. 11. Pull the grounding line out and fixed its two end to the screw on the cover. Figure 3-65 Connect the Grounding Line to the Cover 12.

  • Page 59: Remote Operation

    Video Intercom Main Unit·Quick Start Guide 4 Remote Operation 4.1 Activate Device You cannot use the door station until you activate it. You can configure and operate the video intercom devices via iVMS-4200. Default parameters of door station are as follows: ...

  • Page 60: Edit Network Parameters

    Video Intercom Main Unit·Quick Start Guide STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.

  • Page 61: Add Device

    Video Intercom Main Unit·Quick Start Guide  The default port No. is 8000.  The default IP address of the door station is 192.0.0.65.  After editing the network parameters of device, you should add the devices to the device list again. 4.3 Add Device To configure the device remotely, you need to add the device to iVMS-4200.

  • Page 62: Call Resident

    Video Intercom Main Unit·Quick Start Guide Device is added to the client, check it in the Device for Management area. 4.4 Call Resident You can call residents via the door station. 4.4.1 Dial via Main Unit Steps: 1. Select device, click Remote Configuration. 2.

  • Page 63: Dial Via Nametag Module

    Video Intercom Main Unit·Quick Start Guide 3. Enter the Room No. of the indoor station which the main unit connected to. You can call corresponding resident by press the call button on the main unit. 4.4.2 Dial via Nametag Module Steps: 1.
  • Page 64 Video Intercom Main Unit·Quick Start Guide You can call corresponding residents by press the call buttons on the nametag module.
  • Page 65 Video Intercom Main Unit·Quick Start Guide UD11838B-A...

This manual is also suitable for:

Kpl-060f-vi

Table of Contents