Page 1
WhatsApp community↑ JY9983BR01 As this item contains many parts, please read the installation instruction carefully before installation . Please use tools properly and carefully. If you have any questions about the product and installation, please contact us. service@vabchesofficial.com Our professional after-sales team will serve you online all day.
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware of to slow down and stop when screw is tight.
Board Identification Not actual size LEFT SIDE PANEL RIGHT SIDE PANEL Qty:1 Qty:1 Qty:1 PARTITION FRONT RAIL LEFT DRAWER FRONT Qty:1 Qty:1 Qty:3 RIGHT DRAWER FRONT DRAWER LEFT SIDE DRAWER RIGHT SIDE Qty:3 Qty:6 Qty:6 3-24...
Board Identification Not actual size DRAWER BACK DRAWER BOTTOM CIRCULAR TUBE Qty:6 Qty:6 Qty:2 CIRCULAR TUBE RAIL Qty:2 Qty:4 Part List Ø15X9.5mm Ø6.5X35mm Ø8X30mm M6X30mm CAM LOCK CAM BOLT WOODEN DOWEL BOLT spare:3 spare:3 spare:1 spare:1 Ø6.3X50mm Ø4X35mm Ø3.5X14mm 4X65mm SCREW SCREW SCREW...
Page 5
Part List Ø4X18mm 20X20X18mm M4X6mm 127X12X21mm SCREW BRACKET SCREW HANDLE spare:1 spare:2 Ø3X12mm 350mm 350mm 350mm 14CL 14CR 14DL LEFT DRAWER RUNNER SCREW LEFT CABINET MEMBER RIGHT CABINET MEMBER spare:1 350mm 14DR X1 set RIGHT DRAWER RUNNER ANTI-TIPPING HARDWARE PLUG BOARD Cam Lock Fastening System Insert the cam bolt into the hole first, then insert the cam lock and lock it.
Page 6
Board Identification Not actual size 6-24...
Page 15
STEP9 Ø3.5X14mm 20X20X18mm Ø3.5X14mm X1 set FLIP OVER 15-24...
Page 16
STEP10 Ø3.5X14mm Ø8X30mm Before installation, please ensure that the wooden hole on the part (E) board is facing upwards . ROTATE 90 ° 16-24...
Page 24
STEP18 We have included a set of tipping restraint hardware for NOTE this unit. You must install this hardware to prevent :The tipping restraint hardware included is for accidents or injuries that can result from the unit falling. wooden stud wall construction. It must be attached to a When properly installed, this restraint can provide wall stud.