Moving And Transport After Installation - Hisense 9 Series User's Operation Manual

MOVING AND TRANSPORT AFTER INSTALLATION

If you wish to move the washing machine after it has been installed, the blocking screws/rods
have to be re-installed to prevent vibration damage to the washing machine during transport (see
chapter »INSTALLATION AND CONNECTION/Removing the transport screws/rods«). If you lost
the blocking screws/rods, they can be ordered from the manufacturer.
After transport, the washing machine should be left to stand still for at least two hours
before it is connected to the power mains, so that it can reach room temperature. The
appliance should be installed and connected by a trained technician.
Carefully read the instructions for use before connecting the washing machine. Repair
or any warranty claim resulting from incorrect connection or use of the washing machine
shall not be covered by the warranty.
16