Cleaning Pump Filter - Hisense 9 Series User's Operation Manual

CLEANING PUMP FILTER

During cleaning, some water may be spilled. It is therefore recommended to place an
absorbent cloth on the floor.
Make sure the water has cooled down before you release it from the appliance.
The pump filter must be timely cleaned, especially after washing very fleecy, woolly, or very old
laundry.
Also clean the pump filter if the appliance cannot start the spinning cycle or when there is
debris in the pump (buttons, coins, hair pins or clips etc.).
Open the pump
filter cap using a
suitable tool (press
the door cover and
the cap pops open).
Pull out the water
outlet funnel first.
Rotate the pump
filter slowly counter-
clockwise. Pull out
the pump filter to
allow the water to
drain slowly.
Clean the pump
filter under
running water.
Replace the
pump filter as
shown in the
figure and fasten it
by rotating it
clockwise.
For a good seal, the
filter gasket surface
should be clean.
47