Table of Contents
Advertisement
MINOR MAINTENANCE TIPS
CAUTION
Place a 4 mm thick wooden piece or cardboard sheet
between the brake pads to avoid activation of brake
pads if rear brake pedal is accidentally pressed.
Do not pull up the rear brake pedal to lift or raise the
motorcycle for any reason.
REAR WHEEL ASSEMBLY FOR ALLOY WHEEL
Gently locate rear wheel into
swing arm. Insert spacer into
rear wheel hub RH.
Locate drive chain onto
sprocket and align wheel
into swing arm.
Slide the caliper assembly into the swing arm.
Royal Enfield Meteor 350
72
Assemble chain adjuster
assembly into swing arm LH.
Insert spindle with tommy
bar into rear wheel hub LH
along with washer.
Install washer into spindle
RH. Assemble hex nut and
tighten into swing.
NOTE
Do not tighten hex nut fully.
Tighten chain adjuster nuts on left
and right adjuster such that the
index marks are aligned correctly
on both sides of the swing arm.
Check and ensure correct chain
tension and wheel alignment.
Advertisement
Table of Contents
