Table of Contents
Advertisement
OPERATION OF CONTROLS
Locate and remove 4 nos hex socket bolts below the
pillion seat by using 6 mm Allen key available in the
tool kit.
Remove the LH & RH grab rail. Gently hook the pillion
seat sideways to remove.
Remove 2 nos Hex
flange bolt along with
spacer and grommet by
using
10 mm socket and
ratchet.
Gently lift and pull rider
seat from rear side of
motorcycle.
NOTE
Place the removed seat in a safe location to prevent
■
from scratches and dirt.
Royal Enfield Meteor 350
29
Advertisement
Table of Contents
