Table of Contents
Advertisement
WASHING PROCEDURE
AFTER WASHING
Ensure, the motorcycle is thoroughly dry by
wiping with a clean soft lint free absorbent cloth or
chamois leather.
Remove all adhesive tapes.
Lubricate control cables, pivots for footrest,
side stand, center stand, brake and gear shifter
linkages, drive chain etc., With lube oil.
Polish the painted and plated surfaces using
recommended automobile polishing wax.
Start the engine and allow to run at an idling speed
for a few minutes to warm up engine.
Drive the motorcycle slowly, apply both the brakes
intermittently to dry up the water in brake pads.
Royal Enfield Meteor 350
98
Please clean / wipe out water spoils completely
inside the RH side panel before keeping tools kit
and first aid kit other relevant documents inside
the right side panel.
Advertisement
Table of Contents
