Table of Contents
Advertisement
2. Gently push down the load lever to release and lift it, then lift the load plate to open it
completely.
3. Use your thumb and your index finger to hold the CPU. Align the small triangle maker
and notches on the CPU to the corresponding triangle maker and notches on the CPU
load bracket. Once aligned, carefully lower the CPU straight down into the socket. (Do
not drop the CPU on the socket, or move it horizontally or vertically.)
4. Do not rub the CPU against the surface or against any pins of the socket to avoid
damaging the CPU or the socket.
5. With the CPU inside the socket, inspect all the corners to make sure it is properly
installed.
Lever lock
Pin 1
25
Chapter 2: Installation
CPU notch
CPU load
bracket notch
Advertisement
Table of Contents
