How To Operate - Panasonic CS-A182KR Service Manual

How to Operate

Auto Restart Control.
If there is a power failure, operation will be
automatically restarted after 3 minutes when the
power is resumed with previous operation mode
and airflow direction.
(When the operation is not stopped by remote
control.)
If you do not intend to continue the operation
when the power is resumed, switch off the power
switch at main unit or power supply.
When you switch on the power switch, the
operation will be automatically restarted
with previous operation mode and airflow
direction.
Note: 1. If you do not require Auto Restart
Control, please consult your dealer.
2. Auto Restart Control is not available
when Timer or Sleep Mode is set.
Recommended temperature for health and
comfort.
For Heating : 20°C – 24°C
For Cooling : 26°C – 28°C
For Soft Dry : 1°C
temperature.
<Operation Details>
AUTO – Automatic Operation.
Once the Automatic Operation is selected, the indoor
temperature sensor operates automatically to select
the desired operation mode with Cooling, Soft Dry or
Heating.
The Operation mode changes every hour, when
necessary.
Temperature is not displayed on remote control during
Auto mode operation.
– 02°C lower than room
DRY – Soft Dry Operation.
Soft Dry is a very gentle Cooling Operation consisting
primarily of dehumidifying. It does not lower the room
temperature very much.
Cooling operation until
room temperature
reaches the setting
temperature
Setting
Temperature
When room temperature reaches the setting temperature,
operation will switch to Soft Dry.
Super Low air-
flow amount