Panasonic CS-A182KR Service Manual page 105

Indoor Unit
POWER I
Power Switch OFF / ON
AUTO
OFF / ON
Auto Operation Switch
• Used when the remote control cannot be
used.
Remote Control Signal Receiving
Sound Control
• It can be controlled by pressing Auto
Operation Switch for 10 seconds.
TEST RUN
Operation Test Running / Pump
OFF / ON
Down Switch
• Used when test running or servicing.
Operation Indication Lamps (LED)
•
(Red)......
POWER
•
(Orange).... Lights up in Sleep
SLEEP
• (Orange).... Lights up in Timer
TIMER
Operation Mode
• Heating, Cooling, Soft Dry, and
Automatic Mode.
Time Delay Safety Control
• Restarting is inhibited for appro. 3
minutes.
7 Minutes Time Save Control
• Cooling Operation only.
Lights up in operation,
blinks in Automatic
Operation Mode
judging and Hot Start
operation.
Mode Operation.
Setting.
Auto Restart Control
• Operation is restarted after power failure
at previous setting mode.
Anti-Freezing Control
• Anti-Freezing control for indoor heat
exchanger. (Cooling and Soft Dry)
Sleep Mode Auto Control
• Indoor Fan operates at Super Low fan
speed.
• Operation stops after 8 hours.
Indoor Fan Speed Control
• High, Medium and Low.
• Automatic Fan Speed Mode
– Heating : Fan speed varies from Me
SLo in accordance with
indoor heat exchanger.
– Cooling : Fan rotates at Hi and Me
speed. Deodorizing control
is available.
– Soft Dry : Fan rotates at SLo speed.
Deodorizing control is
available.
Airflow Direction Control
• Automatic air swing and manual adjusted
by remote control for vertical airflow.
• Manually adjusted by hand for horizontal
airflow.
Hot-Start Control
• The indoor fan stops until the indoor heat
exchanger temperature over 30°C.
• The indoor fan operates at SLo and Lo
when indoor heat exchanger temperature
reaches 30°C ~ 42°C.
• Hot start is completed when indoor heat
exchanger reaches 42°C.
–