HOW TO OPERATE
Automatic, Cooling, Soft Dry, Fan
Display
Close the Cover
Operation details
AUTO – Automatic Operation
•
At the start of the automatic operation, Heating,
Cooling or Soft Dry is automatically selected
according to the indoor temperature.
•
The operation mode changes every hour, when
necessary.
•
Temperature is not displayed on remote control during
Auto mode operation.
1
Press to select the desired operation mode
When pressed, the display changes in this order.
COOL
2
Press to start the operation
POWER indicator LED (Red) on indoor unit will light up.
Press once more to stop operation.
3
Press to select room temperature
•
Automatic Operation
Display
HI
- Operation with 2°C higher than standard temperature.
AUTO
- Operation with standard temperature.
AUTO
- Operation with 2°C lower than standard temperature.
AUTO
LO
•
Heating, Cooling, Soft Dry operation
Press to increase temperature by 1°C.
Press to decrease temperature by 1°C.
–
The temperature can be set between 16°C and 30°C.
–
Recommended temperature
For Cooling: 20°C - 24°C
For Cooling: 26°C - 28°C
For Soft Dry:1°C - 2°C lower than room temperature.
DRY – Soft Dry Operation
•
A very gentle Cooling Operation. Consisting primarily
of dehumidifying. It does not lower the room
temperature.
•
During Soft Dry operation, the indoor fan will operate
and stop 4 seconds intervals.
Setting
temperature
a
DRY
FAN
Super Low airflow with 10
Cooling
mins. ON and 6 mins. OFF
Operation
alternately
Switch to Soft Dry when setting temperature
is reached