How To Operate; Automatic, Heating, Cooling, Soft Dry; Operation Details - Panasonic MAC0105011C3 Service Manual

HOW TO OPERATE

Automatic, Heating, Cooling, Soft Dry

Display
Close the Cover

Operation details

Cooling Operation
COOL
• To set room temperature to your preference of cooling
comfort.
a – Automatic Operation
• At the start of the automatic operation, Heating,
Cooling or Soft Dry is automatically selected
according to the indoor temperature.
• The operation mode changes every hour, when
necessary.
• Temperature is not displayed on remote control during
Auto mode operation.
1
Press to select the desired operation mode
When pressed, the display changes in this order.
a
2
Press to start the operation
POWER indicator LED (Green) on indoor unit will light up.
Press once more to stop operation.
3
Press to select room temperature
• a Automatic Operation
Display
- Operation with 2°C higher than standard
HI
AUTO
temperature.
- Operation with standard temperature.
AUTO
(see operation details below)
- Operation with 2°C lower than standard
AUTO
temperature.
LO
HEAT
• Heating,
Press to increase temperature by 1°C.
Press to decrease temperature by 1°C.
– The temperature can be set between 16°C and 30°C.
– Recommended temperature
For Heating: 20°C - 24°C.
For Cooling: 26°C - 28°C.
For Soft Dry: 1°C - 2°C lower than room temperature.
– Soft Dry Operation
DRY
• A very gentle Cooling Operation. Consisting primarily of
dehumidifying. It does not lower the room temperature.
• During Soft Dry operation, the indoor fan operates at Low fan
speed.
Setting
temperature
Switch to Soft Dry when setting temperature is
reached.
DRY
HEAT COOL
COOL DRY
Cooling, Soft Dry operation
Soft Dry operation with Low
Cooling
fan speed
Operation