- By adding a jumper wire to the remote control side and a carbon
resistor (1/4 W, 10 k
possible to select from 4 types of transmission codes including the
condition at time of delivery condition (1).
13. Troubleshooting Guide
13.1. Refrigeration cycle system
In order to diagnose malfunctions, make sure that there are no electrical problems before
inspecting the refrigeration cycle. Such problems include insufficient insulation, problem with
the power source, malfunction of a compressor or a fan. / The normal outlet air temperature and
pressure of the refrigeration cycle depends on various conditions, the standard values for them
are shown in the table on the right.
) to the indoor printed circuit board, it is
61