Equipment; Applicable Models And Necessary Software Version-Up - Panasonic DVCPRO AJ-CA901P Service Manual

1. INSTALLATION PROCEDURES
When installing the Digital Triax System (AJ-CA900HP/EN and AJ-BS900HP/EN) to DVCPRO camcorder,
software Version-upgrade on both CAM_SYS P.C.Board, and VTR_SYS P.C.Board and SW settings on both ENC
P.C.Board and SYNC P.C.Board are required.

1-1. Equipment

Equipment
Personal Computer
Flash memory version-up tool
VFK1725
Writing Software
VFK1726
D-Sub 9pin – 9pin Cable
D-Sub 25pin – 9pin Cable
Screw Driver (+)
Tweezers

MS-DOS , Windows

1-2. Applicable models and necessary Software Version-up

(As of Dec, 2001)
Model Number
[CAM_SYS Board]
AJ-D910WAP
AJ-D610WAP
Ver. 2.0 or higher
AJ-D910WAE
AJ-D610WAE
NOTE: Their software versions can be confirmed at "DIAGNOSTIC menu screen". (See figure 8-1.)
See "1-4. Software Version-up Procedures" for details of actual software version-up procedure.
OPERATION
DRUM RUNNING
THREADING
VTR SYSCON
CAM SYSCON
DATA ROM
DV
MS-DOS
VFK1304A
Flash memory Writing tool (FLASH1)
F1win.exe (Included in VFK1725)
VFK1725 to Camcorder connection board.
Cross type
Straight type
 
95 and Windows 98 are either registered trademarks of Microsoft
IC6201
[CAM_SYS Board]
Ver. <3.3> 1.3 or higher
Ver. <3.3> 3.1 or higher
Ver. <3.3> 1.1 or higher
Ver. <3.3> 3.0 or higher
- DIAGNOSTIC -
: 00000 x 10h
: 00000 x 10h
: 00000 x 10
Ver <P2.01>
Ver <3.2>1.0
Ver <2.0>
Ver <1.00>
Fig. 8-1 DIAGNOSTIC menu screen
Remark
 
/ Windows 95 or Windows

Required versions
IC6203
[VTR_SYS Board]
Ver. P2.02 or higher
Ver. E2.02 or higher
IC6006 [VTR_SYS P.C.Board]
IC6203 [CAM_SYS P.C.Board]
IC6201 [CAM_SYS P.C.Board]
IC 1 [DV UCON P.C.Board]
INS-1

98
Corporation in the United States and/or other countries.
IC6006
[DV µcon Board]
Ver. 2.27 or higher
Pcs.
1
IC1